This FAQ will be constantly expanding as time goes on. If there is a question here that is not answered, try doing a search first before posting another thread. If you think there is something that I should add in, don't hesitate to PM me (this will help reduce chatter in the thread). Hope this helps out.

------------------

Q) What is the difference between a Pre-Facelift and a Facelift Corolla?
A) Basically ...... external differences.
The Pre-Facelift has the Rounded headlights, Interchangeable Front Grille and the rectangular-shaped Foglights,
Whereas the facelift has the tear drop-shaped headlights, the single piece front bar/bumper with the grille built-in & circular-shaped foglights.
On the interior of the facelift, it has a slightly different colour on the centre console and the leather cushioned centre arm rest.

Refer pics below

Pre-Facelift - 02 - late 04


Post-Facelift - late 04 - 06


------------------

Q) What model of Corolla do I have? What are the variants/differences?
A) The order of models is as follows:
- Ascent - Base model without any colour-coding or any optional extras
- Ascent Sport - colour-coded with a Rear Spoiler, no foglights
- Conquest - Colour coded with Rear Spoiler for facelift
- Ultima - Sedan only
- Levin - All optional extras as standard
- Sportivo - Different Variation to the rest

All of these models consist of the same engine, the 1ZZ-FE
Except the Sportivo Range that has the 2ZZ-GE (same engine as the late-model Celica)

------------------

Q) I want to get new body parts to upgrade the appearance of my Corolla. What can I put on mine? How much are they? What are the Part numbers? (eg. Front Lip, Side Skirts, Rear Skirt/Lip)
A) First off, you can get a Genuine Corolla Sportivo Lip/Body Kit from a Toyota Dealer.
Pre-Facelift
Toyota Corolla Sportivo Genuine Front Lip (prefacelift) - 0815412830
$465.00 AUD - unpainted

Toyota Corolla Sportivo Genuine Sportivo Grille (similar to TRD)
$237.00 AUD - unpainted ABS Plastic

Foglights (Prefacelift)
$450.00 AUD for 1 foglight
$900.00 AUD for a pair. (bit pricey)

Toyota Corolla Rear Hatch Spoiler
$231 AUD for spoiler
$501?? AUD for LED Lamp (don't ask)
$76 AUD for Harness

Sunguard (similar to Rear Spoiler without tail-lamp)
$150.00 AUD

Toyota Corolla Headlight Protectors (set of 2)
$85.00 AUD

Toyota Corolla Bonnet Protector
$85.00 AUD

Facelift
Toyota Corolla Sportivo Genuine front lip (facelift) - T0815412842
$500-$600 AUD - unpainted
OR
P/N 0815412841C1 for black, 0815412841A1 for white - painted
$900+ AUD

The Sides and rear of Pre and Post Facelifts are the same, so regarding the part numbers for Sides and rear apply to both.
Toyota Corolla Sportivo Genuine Side Skirts (Set of 2) - 0815012900
$610.00 AUD - unpainted

Toyota Corolla Sportivo Genuine Rear Skirt - 0815812810
$501.00 AUD - unpainted
However, if you have a Sportivo, the Dealers may say that the Rear Skirt is unavailable for your car, and the reason being that the Sportivo has an exhaust tip on it, that will require the rear skirt to be cut into to make it fit.


Toyota Corolla Genuine Optional Accessories
Toyota Corolla Sportivo Genuine Sports Pedals
$180.00 AUD

Toyota Corolla Reverse Parking Sensors
$295.00 AUD for 2-head sensors
$400.00 AUD for 4-head sensors

Toyota Corolla Optional Alarm Upgrade
$214.00 AUD for the kit, (but i can get it at $180.00 AUD)

Toyota Corolla Satellite Navigation Unit
$3063.00 AUD.

They can and only be purchased from Toyota.

Other then Genuine, there are a few options that can be chosen when looking for a new bodykit, parts etc. other then Toyota:
Carmate - replica C-One kits made of Fibreglass
C-One Japan
TRC Tuning
Topstage - Fibreglass kits
Any Aftermarket distributors

All of these distributors will be able to help you out if you choose to go something different.
Threads of Interest:
Sportivo Kits
Difference between Levin and Sportivo kits

------------------

Q) Where can I get a set of the Eyelids and the Mesh Grille that others have? [b]
[b]A) Pre-Facelift - You can choose to purchase the Front Mesh Grille and Eyelids from Ebay. At the moment there is a Group Buy going for the Mesh Grille and Eyelids, if you are keen to purchase these.
A second option is to purchase a set of Eyelids and the Grille from C-One Japan, but will be very expensive, especially being from Japan.
You can also get a Genuine Corolla Sportivo ‘Sports Grille’ from a Toyota Dealer.

Facelift - The Grille CANNOT be changed unless the front bar is replaced, but you can put mesh in behind the grille (refer thread below) as for the Eyelids, Topstage fabricates Fibreglass Eyelids for the Facelift. Topstage
Threads of Interest:
Facelift Mesh DIY
Questions about grille?
TRD Grille

------------------

Q) I want a Cold Air Intake, but I am unsure where to start, what should I do?
A) Refer to this thread:
http://au.toyotaownersclub.com/forums/inde...st&p=319771


------------------

Q) My car lacks the noise I want from it, what can I do to improve the exhaust?
A) First off, you can start by changing the rear muffler of the car to something a bit sportier.
On the 1zz, the exhaust is 1.75” to the rear muffler.
With the 1zz, a good bang for buck mod is to upgrade the 1zz muffler to a 2zz Sportivo Cat-back exhaust. It will make the exhaust a bit louder, but nothing too major; it will also let the back pressure flow a lot better.
On the 2zz, the exhaust is a bit larger then the 1zz, it is 2.25” to the rear muffler, with a 2.5” Stainless Steel Tip.
With upgrading the Sportivo Exhaust, you can change up to 2.5”, which will keep you very happy, and can sell your previous exhaust to a 1zz owner.

Now, places that you can get a new exhaust:
Contact an administrator in your area via a PM to find out what’s available and more convenient for you.
Threads of Interest:
Who got what size cat back
Exhaust Question
CES EXHAUST

------------------

Q) I want more low down torque in my Sportivo, what do I need to improve this?
A) The answer to this is either to PORT your stock headers, as some other members have done, or custom-by-request them that can be fabricated by Exhaust shops.
Recommended, trialed and proven – CES (Custom Exhaust Specialists)
Threads of Interest:
Porting Stock headers or Custom ones?
CES Header Review
Headers for 2ZZ-GE

------------------

Q) I would like to lower my Corolla. What options do I currently have, and which ones are better? Are coilovers available?
A) Please refer to this Thread:
ZZE12x Part numbers

------------------

Q) What's the difference between Kings Lows Springs and Kings Super-Lows Springs?
A) TBA

------------------


Q) I want a new set of wheels. What is the stud pattern and offset on stock wheels, and how large can I go?

A) The stock wheels have a stud pattern of 4x100 and the offset is +45mm. The Stock Corolla Ascent Alloy Wheels are 15” and the Sportivos are 16”. The largest that you can go on the Corolla without further modification or difficulty in finding load rated tires (load rating of 84 for Corolla Ascent and 88 for Corollas with 15" alloys), is 18 inches. A few members here have gone for 19 and even 20 inches with flared/pumped guards. That is with lowered height though. Once you lower your Corolla, you may possibly get some scrubbing. Further information on this is further down.

There is a website (http://www.1010tires.com/tiresizecalculator.asp) as well that is very useful in making sure your selected tire size gets as close to the stock rolling circumference as you can.

As for the stock wheels, it has been confirmed that the Sportivo Wheels share the same stud pattern and offset as the other models. If anyone with one of these Corollas wants to use a set of Sportivo wheels, they will have no problems with fitment or clearance, but you will need the Sportivo Lug nuts to bolt the Sportivo Wheels on.

------------------

Q) Now I know what i can modify, what should I do first?
A) This is completely up to you, you can get some others recommendations, but in the end, it’s YOUR choice on what you want to do.

Hey everyone

Just wonder if anyone has done it, but im looking into replacing my stock muffler and throwing on a straight pipe, the straight pipe will start from the first flange right next to the rear wheel and it will pretty much cancel out the whole muffler. If anyone has any suggestions on the idea please let me know. Also curious to know how much of a defect it really is, and what could happen to me or my license if been caught without a muffler.

thanks

Hey'all.
Just wondering if some one can guide me to find the easiest interior power source/wire to hook up some footwell SMD led's. As the ZR has airbags everywhere, the dome wont be that easy to use if at all. Does anyone know off the top of their heads the best place to pick up an interior light power source? Ie on/off with the doors. Ive searched the forums but most threads seem to be for older rolla's and use the dome.

Thanks for your assistance ")

The engine oil light startd flashing today very randomly when i drive
Just flashes on and off
What does this mean?

Hey. My 89 Camry's front Driver window wont go up or down. Power windows. All other windows work fine, sunroof works too. Wondering if anyone has a diagram on the door to see the motor and such or if anyone has a thought on if theres anything else that could be stopping it from working other then the motor. Switch block is completely fine no issues.

For those of you who were out at Thursdays night's meet in Brisbane and didn't know what the huge burning fireball in the sky was, well I've found out. It was a chunk of a meteor shower which seems to pass regularly.

Courier Mail Article

It was amazing and the best night sky object I've ever seen. We were all impressed.

Hey guys, have a set of 'stivo headers here that have been ported and should be the goods. They will only fit 03-04 models. I would -prefer- to sell them to somebody including fitting (which I can organise) if you want to give me your factory set in return. If you're in another area and want to buy them outright that's cool, unfortunately I would then look for a bit more money. I can paint them either black or silver at no extra charge, or could also organise for them to be ceramic coated in any colour of your choice - unfortunately I'm not sure how much extra that would be until next week.
I would let them go for $250 including fitting, or $250 posted anywhere in Australia. Contact me on here if you want some more information.
Cheers

Over the past few months i have thought about selling my car due to uni fees.....
So i have finally put it up and I'm trying to see what i can get for her over the next few months.

If you know anyone that would like to by a well looked after stivo with no engine mods and few cosmetics im sure they would like to take a look at my link:

Carsales sportivo link

I am open to negotiations and i will still need a car to get me from A to B,
so im happy to trade for another car with cash my way or ill sell it and buy a cheapy anyway.

Ill be at the next meet in Syd this month and it will be looking nice and clean.( unlike the last meet after the sandstorm hahah)


P.S:
Im not doing a part out as of yet, but i will keep you posted.

Just bought 2 years old Aurion Touring. It has 12 mths factory warranty and 2 years of extended warranty. Also it has Toyota Service Advantage service. It still has 2 services remaining. Just wanted to ask which will be a good dealer to drop the car for service. Also Do I have to use dealer to take advantage of Toyota Service Advantage or it can be any licensed mechanic?

Ok ever since tuesday night my car has being playing up... Let my unravel it for you

Tuesday night: Rush a friend to the hospital doing 140 and then when i slow the car down when i get into the hospital, tapping noise. OH GOD!

Wednesday morning: Checked to see if the tapping was still there, GONE!!

TODAY!! Engines starts wanted to cut out a couple of times but then omg GONE!! Then later on today i dont know what it was but trying to kick back from 3rd to 2nd in an auto, oh she wasnt going to do it.... ill i get was vibrations in the car like the gearbox was gone and no power. Then 20 mins later with the car off and me in the shops come out!! GONE!!!

WHAT THE HELL IS UP WITH MY CAR!!!

I know it needs a service *cough* MAJOR lol... so maybe could that be it?

hey all im just wondering would the lock nuts (rays or any other brand) fit the kappa's wheels ?

i read rays will only fit rays wheels

I've pretty much decided to replace my 2006 Golf GTI with a new Aurion Presara early in the new year. Up until the GTI, my previous car history was more aligned to the Presara style of vehicle. Mitsubishi Verada, Holden Statesman, Holden Calais, Toyota Cressida etc. etc.

I'm seeking comments from Aurion owners as to the good points and maybe the bad points relating to the ownership experience with the Aurion. I haven't driven one yet. Might do so this weekend.

For those interested I was searching on ebay for bits and pieces then I came across this...

http://cgi.ebay.com.au/TOYOTA-COROLLA-CONQ...=item1c0e0b258a

Hi all,
Ive got a tacho dash out of a AE92 and I want to put it in my AE95 wagon.

I have the schematics for the AE95 but require them for the AE92, has anyone got a w/shop manual they can copy the cluster schematic pages for me?

cheers.

I tossed up whether to put this in the stupid thread, but anyway here we go; I'm trying to find a place that can do prints onto plates (like the ones you eat off of) and mugs. I don't want to order 500+ or what ever as I only want to use them for work. Why do I want custom plates and mugs you ask? Well so I can have my ugly mug stuck on them so no one steals my mug and plate (who wants to eat their food from a plate while having to look at a picture of me? )