Jump to content


personalised plate what do you think

mtbrider
 Share

Recommended Posts

-JC- Veteran

-JC-

Posted
Posted

Nice, but see if you can get the "US" Style one, which has no dot in between the letters and numbers.

Cheers

JC

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted

m8 its ok but like that guys said what if ya mod it?

ive got heaps of ideas for plates but cant make up my mind.

and dont wanna tell anyone incase they steal the idea lol


DevoStivo Contributor

DevoStivo

Posted
Posted
Clever... but it'll be wrong if you do mods !

You need one of those James Bond ones with the rotary digits.

That way you could change it as you do mods

141KW

160KW

171KW

200KW

0 KW (Blown engine)

kcorro Grand Master

kcorro

Posted
Posted

if james bond got a stivo and q tuned it i wonder what it could do?

qkslvr Grand Master

qkslvr

Posted
Posted

for one, it would have telescopic reach adjustments in the steering column :P

hydralic suspension :lol: the ultimate pimp-daddy s'tivo

Sport1vo Grand Master

Sport1vo

Posted
Posted
Thinking about a personalised plate. What do you think

:huh: Do our vehicles really have 141kw? :huh:

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted

its advertised to have 141kw in the new stivos.

thats what the recall was about.

when they did sound testin on them they realised they only had 120somthing kw .

but id like to have mine dynoed to make sure its really 141kw.

love to do it up and get 150+ @ the wheels. i dont think the 14`1kw is @ the wheels though.probably just over 100@ wheels if that

MR22ZZ Grand Master

MR22ZZ

Posted
Posted
if james bond got a stivo and q tuned it i wonder what it could do?

Would be great.. but unfortunately q died!!!! Would have to make do with what ever John Cleese could come up with... :lol::lol::lol::lol::lol:

SXN16V Enthusiast

SXN16V

Posted
Posted
when they did sound testin on them they realised they only had 120somthing kw .

but id like to have mine dynoed to make sure its really 141kw.

love to do it up and get 150+ @ the wheels. i dont think the 14`1kw is @ the wheels though.probably just over 100@ wheels if that

141kw, 1/2 Kw more then the celica becuase it has a longer exhaust system for better flow.

Keep in mind the original System with no ecu, Just bare engine Only Managed around 129kw written on the initial SAE design and pre approval of the engine production.

In Australia We have pretty good fuel.. But not as good as japan for where they get is 100+ RON, the max we get is 98RON and even that isnt genuinely true. The weather conditions we have here and the blends will be 98 at its best. Dont you find when going from different servo's and different days of the weak throttle response might slightly change..

141kw is not at the wheels but at the flywheel (read engine specs there normally qouted at the fly) At the dyno i've seen the sportivos between 100-120kw which all depends on alot of factors, Tyre pressure Ambient air, Intake air temps. Not all dyno's are the same just like all drivers there will always be someone faster then you.

factory and real world outputs that ive seen

To make 140/150kw at the wheels you'd need about roughly 180KW+ at the engine.

Mitsubishi Evo 2.0L makes around the 140kw on all four wheels (206kw fly).

Blacktop SR20DET's make around the 120KW at the wheels factory trim(160-80fly).

4AGZE 1.6L makes 102kw at the front wheels / 2psi Pulley Upgrade / (123kw fly)

Netz Enthusiast

Netz

Posted
Posted

Speaking of Plates I must tell you Guys and Girls what ones I have got for my car

SXYRYD

  • 3 weeks later...
SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted

Hey mtbrider

check with ppq about plates. I think 14 IKW is already gone. I know of a black stivo with 141 kw. Get on the ppq website and check your options. If it's available get it straight away or someone else will!! Or get your mods done and then pick your plate. My plates are already wrong so maybe I'll try for 141 at the wheels.(C'mon Craig the race is on :P :P :P )

cheers SILVABULLIT.

  • 3 weeks later...
Sport1vo Grand Master

Sport1vo

Posted
Posted

anyone wants to buy my custom number plates?

time to get rid of 'em.

Clunk Member

Clunk

Posted
Posted
on ebay the other day i saw vic plates 'VVTLI' for around $250 i think

$250 bucks? Thats a bargain! I got the plates "CLUNK" and paid $302 for them!

Vic Roads have made a mint out of me! :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    4. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    5. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    6. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    7. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    8. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    9. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership