Jump to content


Cheap Panel Beater in Melbourne - Where?


Matrix
 Share

Recommended Posts

Hi Melbournians, can you please recommend me any cheap panel beater to have my 2nd hand rear skirt installed? I've been quoted $200 (no paint job required just install) and i believe they are trying to rip me off. So, your recommendations and help is much appreciated.

Thanks in advance,

- Matrix -

Link to comment
Share on other sites

Thanks guys.. I might try DIY... we'll see how it goes..

its easy if you aint spraying it.

i DIY'd mine, if you have a second hand one, there should be holes already on the lip,

what you do is take your mud flaps off, using one of the existing bolts, line the lip up and bolt it in.

to hold mine up at the centre i used the black silicon glue stuff

Link to comment
Share on other sites


Thanks guys.. I might try DIY... we'll see how it goes..

its easy if you aint spraying it.

i DIY'd mine, if you have a second hand one, there should be holes already on the lip,

what you do is take your mud flaps off, using one of the existing bolts, line the lip up and bolt it in.

to hold mine up at the centre i used the black silicon glue stuff

The thing is.... when i purchased my rear shirt, i wasnt provided screws and brackets. So i'll just need think of some way to hold it up properly. So, i've planned to get screws and lots of double sided tapes.... hehehe... that should do the job.

Link to comment
Share on other sites

Thanks guys.. I might try DIY... we'll see how it goes..

its easy if you aint spraying it.

i DIY'd mine, if you have a second hand one, there should be holes already on the lip,

what you do is take your mud flaps off, using one of the existing bolts, line the lip up and bolt it in.

to hold mine up at the centre i used the black silicon glue stuff

The thing is.... when i purchased my rear shirt, i wasnt provided screws and brackets. So i'll just need think of some way to hold it up properly. So, i've planned to get screws and lots of double sided tapes.... hehehe... that should do the job.

sorry for the late reply, with the double sided tape you could that that :) you would just need to retape it in the long run as in for screws, you use your original bolts that are holding your mud flaps, the holes on the ends of the lip should match up with one of the holes for the mud flaps

if you want i can take a picture of mine to show you

Edited by tiet
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Pistons for 69 Corona

    2. 6

      2019 RAV4 oil filter wrench

    3. 6

      2019 RAV4 oil filter wrench

    4. 6

      2019 RAV4 oil filter wrench

    5. 0

      AE82 2zz-ge and 6spd swap

    6. 2

      2022 Toyota Camry Hybrid Should I buy it.

    7. 8

      2004 Sportivo RHS Headlight

    8. 6

      2019 RAV4 oil filter wrench

    9. 0

      kluger enhancements

    10. 8

Toyota Owners Club AU © 2020 | This Website has no association with Toyota (AU) or Toyota Motor Corporation. | Cookies | Privacy Policy | Terms & Conditions

×
×
  • Create New...

Forums


News


Membership