Jump to content

Power seats adjustment?

momosan8

By momosan8
in Aurion / TRD Aurion Club

 Share

Recommended Posts

momosan8 Enthusiast

momosan8

Posted
Posted (edited)

Hi

Just want to check with those with power seats (I've got a SX6), does the seat till up and down on both ends of the seat? The reason I ask is that when I tilt the seat up, only the back of the seat tilts up, the front of the seat doesn't move at all... is that normal??

I'm taking the car to service tomorrow... if there is a problem, I would want them to fix it then.

Cheers

Edited by momosan8
DJKOR Grand Master

DJKOR

Posted
Posted

I can raise either the front or back of the seat on mine, which is standard. You can adjust the tilt as mush as you want as well. Which part of the switch are you pulling/pushing? With the 'long bar' switch, you can pull or push on either end to adjust the front or back of the seat. It's hard to explain in words really, but you can adjust the seat tilt in either direction. This may be of use as well:

Power seat animation

momosan8 Enthusiast

momosan8

Posted
  • Author
Posted
I can raise either the front or back of the seat on mine, which is standard. You can adjust the tilt as mush as you want as well. Which part of the switch are you pulling/pushing? With the 'long bar' switch, you can pull or push on either end to adjust the front or back of the seat. It's hard to explain in words really, but you can adjust the seat tilt in either direction. This may be of use as well:

Power seat animation

Thanks for that!!! Did you capture that animation yourself? Mmm... I will have to get mine fixed then. Luckily I'm having the 1000km service today. Will probably need a wheel alignment as the steering keeps going to the left....

Thanks again DJKOR, can always rely on an excellent response from you :)

tekkyy Mentor

tekkyy

Posted
Posted (edited)

its funny how it doesn't actually have an up-down adjustment

to move up the seat turns towards a V shape

both front (leg cushion) and back (seat base tilt) goes up

our Camry Touring isn't like that

it had a distinct up-down adjustment

doesn't bother me much though

I put the seat height all the way down

and actually wished the seat can be adjusted a bit lower

again, the old car can go lower

Edited by tekkyy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    4. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    5. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    6. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    7. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    8. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    9. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership