Jump to content

MOTORKHANA WA

WildfireATX

By WildfireATX
in Aurion / TRD Aurion Club

 Share

Recommended Posts

WildfireATX Proficient

WildfireATX

Posted
Posted

Calling All WA members!!!

To celebrate getting my licence back after 3 years (been on extraordinary licence for a while now) i am organising a Motorkhana day at the RAC Driving Centre at the airport. It invovles a dirty great big skid pan with a course set out in witches hats.

It costs roughly $80.00 if i get 10 ppl

Less if i get 16 togetehr. I can account for at least 6 people already but any interest is welcome.

You can thrash your car with no trouble from anyone. i doubt you will get out of second gear but its loads of fun and you can put your car up against at least one soarer, a commodore, possibly a WRX a skyline and some AE86's so register if your itnerested discretion is mine if u come or not.
httttt Grand Master

httttt

Posted
Posted

Congratulations :toast: and god speed. :spiteful: lol

Take some photos and video for us not in WA!!!

e240 Mentor

e240

Posted
Posted

If the Aurion had a handbrake instead of a footbrake, motorkhana's would be so much more fun... :D


Freddo Mentor

Freddo

Posted
Posted (edited)

i know its no substitute but learn the left foot brake since it an auto.

makes a difference being able to put it in the sweet spot coming out of a corner.

ill come down and take some fotos

Edited by Freddo
WildfireATX Proficient

WildfireATX

Posted
  • Author
Posted

No fixed date yet but will be either a sat or sun afternoon in either late september or early october.

I will get back with dates once i have numbers i need numbers to book or i'm out a grand.

Mole Veteran

Mole

Posted
Posted

I suppose I could go, if theres auto Aurions my auto Celica shouldn't be too embarrassing. Been wanting to try one of these for a while.

I could prolly just leave it in 1st :lol:

I can only go if its after the 16th of October (ill be in Europe).

WildfireATX Proficient

WildfireATX

Posted
  • Author
Posted

Anyone is welcome to apply its not a day where speed counts its more to do withdriver ability.

My friend in a 4A powered ae86 beat another friend with a 4AGE powered ae86 so its not about power

and1 Grand Master

and1

Posted
Posted

I'm interested pending date..

So that means you haven't booked yet?

I heard you have to book like 1-2 months in advance because most of the time its booked out.

If you haven't booked, can I suggest a tuning day there instead :D

Shahzan Mentor

Shahzan

Posted
Posted

A good opportunity to let my AE86 breathing on the track and see how it can handles...

So gonna install extractors ASAP!!!!

iam hoping for SEPTEMBER ! ! !

Gonzalis Rising Star

Gonzalis

Posted
Posted

I would prefer to do a tuning day, i reckon would be heaps of fun. But ive heard to be able to do it you have to have completed a AHG training day?

and1 Grand Master

and1

Posted
Posted

Perhaps when this has a confirmed date make a new thread in the events section?

That way everyone will see it..

Shahzan Mentor

Shahzan

Posted
Posted
Perhaps when this has a confirmed date make a new thread in the events section?

That way everyone will see it..

agreed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    2. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    3. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    4. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    5. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    6. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    7. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    8. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    9. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    10. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
×
×
  • Create New...

Forums

News

Membership