Jump to content


hard to start ?

Rony10

By Rony10
in Camry Club

 Share

Recommended Posts

Rony10 Enthusiast

Rony10

Posted
Posted

Hi all, my mums got a 1989 Camry 4 cyl, lately it takes quite a few turns of the key to before she actually starts running, it sounds strong battery/ ignition wise but seems like its not getting the amount of fuel it needs to kick over, once its going it runs fine.

any suggestions what could be causing this would be appreciated

Link to comment
Share on other sites
peregrine Proficient

peregrine

Posted
Posted
Hi all, my mums got a 1989 Camry 4 cyl, lately it takes quite a few turns of the key to before she actually starts running, it sounds strong battery/ ignition wise but seems like its not getting the amount of fuel it needs to kick over, once its going it runs fine.

any suggestions what could be causing this would be appreciated

Could be one of a number of things but an easy starting point would be to look at the plugs and check the leads. Not knowing your knowledge of mechanics from there on it gets a little more tricky, EI checking fuel delivery, as the system should be under pressure which should be released before checking especially if the motor is hot. A good mechanic should be able to pick up the problem quite cheaply.

Link to comment
Share on other sites
Rony10 Enthusiast

Rony10

Posted
  • Author
Posted
Hi all, my mums got a 1989 Camry 4 cyl, lately it takes quite a few turns of the key to before she actually starts running, it sounds strong battery/ ignition wise but seems like its not getting the amount of fuel it needs to kick over, once its going it runs fine.

any suggestions what could be causing this would be appreciated

Could be one of a number of things but an easy starting point would be to look at the plugs and check the leads. Not knowing your knowledge of mechanics from there on it gets a little more tricky, EI checking fuel delivery, as the system should be under pressure which should be released before checking especially if the motor is hot. A good mechanic should be able to pick up the problem quite cheaply.

Thank you for your reply, I will check the plugs and leads, I have just been told that it is only hesitant to start from cold start, once its been driven she starts up normally, shall see what happens .

many thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      2011 Hilux fuel injector seals

      Hi all, I have a question regarding the 2011 Toyota Hilux 3.0l turbo diesel model. A friend of mine who is a mechanic mentioned that they may be known for issues with the fuel injector seals leaking but he couldnt remember whether it was common in the 2009 or the 2011 models. It was apparently an issue that was solved by redesigning the engine, solved by 2012 and possibly 2011 model? Does anybody know anything more about this or had there own experiences with the 2011 engine? Any insight is appreciated as I'm considering buying one, thanks!
      Jack 76 in Hilux Club
    2. 1

      2016 Hilux SR5 Coolant Issues

      Need more information, what engine are we referring too? Where is the bypass actually at? What hose actually blew off ? The more info you provide actually helps as it helps draw a picture for those who can't actually be there, Cheers Conrod A picture or two would be very beneficial
      CONROD in Hilux Club
    3. 0

      Son's First Car--98 Corolla Seca--Overfilled Oil--Cactus??

      Hi folks, Concerned dad of first-time car-owner son. He just bought a 1998 Toyota Seca 1.6L Automatic in Melbourne. Perfect condition. Saw that the oil was so low when warm it did not even touch the dipstick. Filled it to within specs on the stick (took about 1L). Drove 15 mins to home--car performed well. Checked in the morning. Still low. Added another 0.7L (now about 1.7L added total). Test drove for 3 mins. Noticed gear shifting suddenly irregular and slow. Rechecked oil level. It was now 5cm over the limit on the dipstick!! Drained off 1.5L through the pan and no more oil would come out of the pan. Mystified that the oil was still 5cm over the dipstick limit. Took a syringe. Drained off another 0.25L through the dipstick tube, which was about everything that we added in total. Oil level now 1cm over the dipstick limit. Engine still starts and idles fine, but now the car will not go into gear at all. My son is devastated. Please help.
      MrTbeezy in Corolla / Corolla Sportivo Club
    4. 1

      What to say!

      Welcome Jim, hope those tools arrive soon so once again it's back to work for you mate KAA
      KAA in New Members Introductions
    5. 0

      2019 Landcruiser 200 Map update Bricked System

      Hi guys, our local toyota dealership for the last 12 months have tried at least 4 times to update the navigation maps on our car. I have repeated warned them that they need to be careful which SD Card update they try to use, however, they have ignored my warnings and a month ago, they appear to have completely "bricked" the system. The maps screen is now completely blank and it says to contact toyota dealership for help. The dealership have no idea what to do now and have informed me that a warranty claim has been submitted to completely replace the map display unit. My wife is just a little ****ty right now as she has been without a functioning maps display for about 4 months in total and now this. So, given the unit is going to be replaced at some point, i have decided "what the heck, I may as well try to find an SD Card with a firmware update that can "downgrade" the ******up the dealership have caused". Does anyone know if its possible to "unbrick" this system with an older firmware update (say the original 2019 one)? Any ideas/help would be appreciated. kind regards Adam
      adamjedgar in Landcruiser Club
    6. 4

      2005 Toyota Corolla miss fire on acceleration cant scan obd2

      If you haven't sorted the problem out yet, I would recommend looking into whether the intake manifold seals are leaking. These were very common, but it won't explain the ignition coil issue.
      Novicebutnice in Corolla / Corolla Sportivo Club
    7. 4

      2005 Toyota Corolla miss fire on acceleration cant scan obd2

      I recommend looking into replacing the intake manifold seals, these were very common.
      Novicebutnice in Corolla / Corolla Sportivo Club
    8. 0

      RATTLING CAMRY 2013

      I really hope someone can help me with my annoyingly loud problem… my camry has a loud rattle whenever its in gear, it stops once its in park or neutral. Ive checked the heat shields they are good. If anyone has any suggestions, ill be much appreciated… plus when its warmed up and driven around its harder to start. I’ve attached a video of the rattle, you can hear when i put it into gear it rattles then stops when its in park. My bad I’ve accidentally put two of the same vid (don't know how to delete it) IMG_2585.mov
      Atara in Camry Club
    9. 0

      Wtb 2005 Toyota corolla Sportivo parts

      Hi converting my 2006 Toyota corolla hatchback into a Sportivo Looking for some 2005 Toyota corolla Sportivo parts Side skirts no damage any colour is fine Rear spoiler Whole front bumper with with fog lights and wiring and switch or just the front lip All interior door trimmings front and back seats no damage front dash mount mat
      RuneUrsa in Corolla / Corolla Sportivo Club
    10. 0

      Corolla 3k modified engine + 5 speed box For SALE

      Hi all, I have owned this engine for approx 30 years, it has not run in the last 15 years. needs rebuild, at the least new rings. Was last informed that the Cam was not aligned correctly after the fitting of a new timing chain and head Was originaly a stock 3K 1.2L ke20 for the first 7 years before becoming tired and worn-out. I was so happy with the engine that i spent at least 2 thou on a full rebuild including rebore to 1.3L, very lumpy billit cam, hi comp ported head double springs,fully balanced, lightend flywheel.ect ect Due to budget I could only afford a 32 Webber down draught carby (probably needs new carby kit), stock distributer and a 5 speed manual Would very much like to see it go to a new home so it can come back to life and rev hard again. Please ask any questions you may have.
      toyoke20 in Group Buys
×
×
  • Create New...

Forums

News

Membership