Jump to content


Rooaar

czaja74

By czaja74
in Aurion / TRD Aurion Club

 Share

Recommended Posts

czaja74 Veteran

czaja74

Posted
Posted

Thought I share my latest adition to my Aurion. I think that video says it all

(95MB) so be patient.

LINKY
moggillsx6 Community Regular

moggillsx6

Posted
Posted

Dude where did you get all that????!!! I have searched high and low for K&N kit liek that for my SX6 but can't find one. If you could let me know I would appreciate it....Cheers, Mick email is lmcosgrove@yahoo.com.au

czaja74 Veteran

czaja74

Posted
  • Author
Posted

Dude where did you get all that????!!! I have searched high and low for K&N kit liek that for my SX6 but can't find one. If you could let me know I would appreciate it....Cheers, Mick email is lmcosgrove@yahoo.com.au

You needto look for K&N Camry '08. I got it from HERE .

DJKOR Grand Master

DJKOR

Posted
Posted

They sure roar even better under load don't they. Damn I miss mine. I wish I could fit one to my TRD. This thing would sound sweet with one.


VF-X Grand Master

VF-X

Posted
Posted

Definitely Hot.. Surely want one for my ride. This + Varex = Beast!!

DJKOR Grand Master

DJKOR

Posted
Posted

This + Varex = Beast!!

Actual SRI + Varex = waste of money.

Once you put the SRI on, the purpose of the Varex is basically cancelled out. With the Varex open, you can still cruise around while keeping it quiet. It only really makes noise when you get higher in the revs. Once you put the intake on, regardless of whether your exhaust is quiet or not, you will get a bit of noise in the higher revs. It therefore isn't so quiet anymore. For the cost of the Varex, you'd be better off getting a proper exhaust and dealing with any extra noise you get when you push it, because if the exhaust doesn't make the noise... the intake sure will.

1stKill Grand Master

1stKill

Posted
Posted

Throaty B) ...sounds awesome,it's one thing a modified Aurion needs is a sweet engine bay note and this delivers,well done. :)

VF-X Grand Master

VF-X

Posted
Posted

Actual SRI + Varex = waste of money.

Once you put the SRI on, the purpose of the Varex is basically cancelled out. With the Varex open, you can still cruise around while keeping it quiet. It only really makes noise when you get higher in the revs. Once you put the intake on, regardless of whether your exhaust is quiet or not, you will get a bit of noise in the higher revs. It therefore isn't so quiet anymore. For the cost of the Varex, you'd be better off getting a proper exhaust and dealing with any extra noise you get when you push it, because if the exhaust doesn't make the noise... the intake sure will.

I thought it'll have 2 different set of noises..? The Varex has a deep note comin from behind whilst this one roars from the engine itself. When you fully opened the Varex, the noise is quite noticeable already with medium revs.

I get what u Sayin Daryl, but will it really cancel out like what you said? This happened to you?

DJKOR Grand Master

DJKOR

Posted
Posted

I thought it'll have 2 different set of noises..? The Varex has a deep note comin from behind whilst this one roars from the engine itself. When you fully opened the Varex, the noise is quite noticeable already with medium revs.

I get what u Sayin Daryl, but will it really cancel out like what you said? This happened to you?

Not the point I was trying to make.

The purpose of getting the Varex is to have the ability to make it go quiet when you want. Once you put the intake on, making the exhaust quiet seems pretty pointless because now your intake is going to be making the noise. You may as well buy two decent mufflers that don't have any of those valves in them like the Varex and save a good $500-$600. Will also be lighter (not really an issue for most people), and more reliable.

VF-X Grand Master

VF-X

Posted
Posted (edited)

I thought it'll have 2 different set of noises..? The Varex has a deep note comin from behind whilst this one roars from the engine itself. When you fully opened the Varex, the noise is quite noticeable already with medium revs.

I get what u Sayin Daryl, but will it really cancel out like what you said? This happened to you?

Not the point I was trying to make.

The purpose of getting the Varex is to have the ability to make it go quiet when you want. Once you put the intake on, making the exhaust quiet seems pretty pointless because now your intake is going to be making the noise. You may as well buy two decent mufflers that don't have any of those valves in them like the Varex and save a good $500-$600. Will also be lighter (not really an issue for most people), and more reliable.

Ahhh... I get ur point.. Thanks for that. Im fully aware of it anw, and it's fine by me.. I'm now thinking whether I should replace the Varex or not. The inlet was so big that they're visible to evry1 including cops. It looks sick, but Im still thinking about it.. =/

Edited by VF-X
DJKOR Grand Master

DJKOR

Posted
Posted

Ahhh... I get ur point.. Thanks for that. Im fully aware of it anw, and it's fine by me.. I'm now thinking whether I should replace the Varex or not. The inlet was so big that they're visible to evry1 including cops. It looks sick, but Im still thinking about it.. =/

Well if you already have it... then what's done is done. It's mainly just for future reference for others since the Varex seems to be gaining slightly more interest.

czaja74 Veteran

czaja74

Posted
  • Author
Posted

I didnt have chance to drive it yet. Also I noticed that when bonnet is closet it produces even deeper tone. I'll take it for the drive later on and report back. But so far I'm happy.

Adamsy Grand Master

Adamsy

Posted
Posted

DJKOR, mate did you end up doing another Dyno run after you installed one of these on your old car, if so did it produce any more power, the same or less?

DJKOR Grand Master

DJKOR

Posted
Posted

DJKOR, mate did you end up doing another Dyno run after you installed one of these on your old car, if so did it produce any more power, the same or less?

No... but I took it to the drags with similar conditions to compare to. The verdict was, there was neither a gain or a loss.

Adamsy Grand Master

Adamsy

Posted
Posted

Cheers for the info DJ :)

  • 3 weeks later...
legend_of_lazz Proficient

legend_of_lazz

Posted
Posted

I'm about to buy either a K&N Typhoon SRI or a Fujita CAI. They are roughly the same price off of eBay and will do pretty much the same thing. The only thing stopping me from deciding is the sound. Has anyone heard both the K&N and the Fujita? Do they sound different at all? And if so which sounds better?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    2. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    3. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    4. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    5. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    6. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    7. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    8. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    9. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    10. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
×
×
  • Create New...

Forums

News

Membership