Jump to content

Aurion with HSV exhaust.

outback

By outback
in Aurion / TRD Aurion Club

 Share

Recommended Posts

outback Proficient

outback

Posted
Posted (edited)

Heyya, so we just got a exhaust put on the aurion, our local guy couldnt get any pre-made ehxaust systems, so he was playing around with diffrent mufflers, when he disscoverd a HSV system fit perfectly, i dont know the specs but it sounds awesome.

Edited by outback

diamond white Experienced

diamond white

Posted
Posted

Heyya, so we just got a exhaust put on the aurion, our local guy couldnt get any pre-made ehxaust systems, so he was playing around with diffrent mufflers, when he disscoverd a HSV system fit perfectly, i dont know the specs but it sounds awesome.

Hi outback....good timing...I'm just starting the hunt for exhaust and wondered if yu might get some more details about the set up like parts,cost etc...

cheers! Cam:clap:

whitezr6 Experienced

whitezr6

Posted
Posted (edited)

nice exhaust, has grunt comparable to the varex system

but, if i didnt see the car and just heard the noise, id say oh a holden driving by, just my thought

other than that well done though, more vids pls :)

Edited by whitezr6
moggillsx6 Community Regular

moggillsx6

Posted
Posted

Mate if this vid is not some sort of stitch up you need to post some specs etc. If its the real deal i'd have one in a flash and i am sure there would be some others that would too....might even be some other exhaust places happy if they could market it as well....

let us know some more details hey...


outback Proficient

outback

Posted
  • Author
Posted

it is my mums car, and i got it put on for her birthday, it was only 500$ pretty much i just told them to make it as loud as they could..

i think they are hsv resonators or hotdogs in there somewhere, i will swing by and ask him what exactly it was they did to it, there arent mufflers on the end.. just tips, ill grab some pics!

it does sound veryyy beefy. like it should

Adamsy Grand Master

Adamsy

Posted
Posted

lol that's pretty eff'd up! i don't know if it's just me but it even sounds a little HSVish? But if it's true and it is HSV parts then it stands to reason that after market HSV systems should fit as well. mmmmm having dreams of a Walkinshaw set up :)But we really need to know exactly what from a HSV was fitted to the Sportivo and what series it’s from, Z or E series etc.

whitezr6 Experienced

whitezr6

Posted
Posted

lol that's pretty eff'd up! i don't know if it's just me but it even sounds a little HSVish? But if it's true and it is HSV parts then it stands to reason that after market HSV systems should fit as well. mmmmm having dreams of a Walkinshaw set up :)But we really need to know exactly what from a HSV was fitted to the Sportivo and what series it’s from, Z or E series etc.

I like how you think :D

Jap Experienced

Jap

Posted
Posted

Don't get too excited til you get some particulars, boys.

I honestly don't like it.

Sounds too gutted.

SCOOTA44 Grand Master

SCOOTA44

Posted
Posted

Needs an intake transplant too, it has a bit of a raspy bark, something that i might have killed on mine with resonator and hotdog setup. One question, did they do anything to thr front Y pipe ?

SecaBoy Grand Master

SecaBoy

Posted
Posted

my guess would be that its a hot dog resonator after the cat with no other mufflers...

sounds VERY similiar to when i removed the exhaust all together after the cat... :)

and for $500 in total, i'd be very surprised if they touched the front y-pipe...

Noodle Boy Grand Master

Noodle Boy

Posted
Posted

um, interesting, a toyota with a HSV exhaust system...

e240 Mentor

e240

Posted
Posted

The sound just doesn't seem to match the car.

Maybe its just me (Yeah, I just went to my fav exhaust shop yesterday to make my civic less loud from already not loud..LOL).

You sure there was no welding involved? I find that abit hard to believe that a HSV system will bolt straight in.

At the very least, you should be looking at welding up flanges and brackets.

outback Proficient

outback

Posted
  • Author
Posted

500$ mates rates lolz, i still have not seen the guy, but it sounds soso good in real life.

there has been some welding etc, i think what he ment was it wasn't such a struggle to get it to fit

also, the old mufflers that came off.. were full of petrol :\ is this normal in an aurion? or is it tuned badly?

Ronnyboy Grand Master

Ronnyboy

Posted
Posted

Sounds ok, its got the grunt, you got for a good price.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    4. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    5. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    6. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    7. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    8. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    9. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership