Driving Lights Installation on a 1993 Camry Wagon Executive SDV10

[Craig 'Cam-pollo']

Hey guys, i purchased a set of new driving lights because i do alot of highway travelling.

I'm having trouble finding the high beam active circuit. Would anyone have already gone through this installation maybe provide me a little help?

What would be a huge bonus is if someone can point me to and Aussie 93 Camry wiring diagram... been looking for weeks now on the net but nothing.

I may have to buy a full manual, or just take it to an auto-electrician ( me being an electronics buff - haa! )

Thanks for any help or comments of any kind, in advance...

Craig.

[Craig 'Cam-pollo']

Hello again, i'm guessing that with 45 or so views on this post that not many people have done this.

FYI, I have now successfully installed my "driving lamps". A little trial and error and about 3 hours is all it took, and i saved myself a $100 auto-electrician bill.

For future reference, the 'high beam active circuit' wire that i patched into was the 'RED WITH BLUE STRIPE' wire on the centre pin of the left hand 'low beam headlight (?)' bulb adaptor. (not the high beam bulb adaptor as i first thought - i hate desoldering!)

The lamps are 100W each, from SCA, and are an excellent addition to my night-driving experience. $50 a pair.

I didn't bother installing the in-cockpit on/off switch either, rather, just using the main high-beam flasher handle on the steering column.

Anyway, happy travels to you...

[Spider]

Thank you for the last post, great you have it sorted and I am sure someone else will find that usefull.

Spied.

[Craig 'Cam-pollo']

No worries mate, i hope it helps other people. :)

[tanda]

No worries mate, i hope it helps other people. :)

Where did you fit the driving lights? I bought a mounting bar with number plate mount from Supercheap Auto which helps protect the lights. I hooked up the light to the high beam as well and used a relay which I hope you did. This gives you more power through the relay via the battery. The high beam wire goes to the + side on relay & other side of relay to ground.