Jump to content

celica sx 1991 parking lights

webjet

By webjet
in Celica Club

 Share

Recommended Posts


woot woot Proficient

woot woot

Posted
Posted (edited)

Yeh they are the t10 wedge. Same for the number plate lights. Get from Jaycar for like 3 bucks for two. Make sure they are not overly blinding and do not focus light on a point as it makes them very obvious to Cops.

Edited by woot woot
Link to comment
Share on other sites
webjet Contributor

webjet

Posted
  • Author
Posted

ok cool thanks would u know how to access the parking lights when i turn the lights on they pop up but there is 2 bolts holding the headlight when i look down from the top do i undo them to get to the parking light. also how do i make it so the parking lights arent focused on so they wont draw police attention

Link to comment
Share on other sites
woot woot Proficient

woot woot

Posted
Posted

It should be the one screw directly underneeath the headlight. NO need to keep them popped up. Should then become loose then think pull the whole thing forward a bit and should come out. Get SMD leds or ones that are not normal LEDS that blind you when they are on Sorry thats is what i ment by the focus. Jaycar should be able to show you them lit up. The parker housing is a bit tinted so it shold be fine. Just do not go for crazy bright

Link to comment
Share on other sites

woot woot Proficient

woot woot

Posted
Posted

Its the phillips head screw facing forwards just above the bumper. If you follow the parking light you will see it has a little tab that lines up underneath the carbon fiber grill thingy.It should be tucked into the corner near the parking light but under the grill but able to be accessed with out removeing anything. If you squat in front of the front of the car near the parker you will see it.

Hope that helps

Link to comment
Share on other sites
webjet Contributor

webjet

Posted
  • Author
Posted

thanks mate i found it and put them in very quick install. also should i make a new post about those pads inside the door that when the windows goes up and down it slides on those pads cause i need to get new pad things for it cause its scratching the window

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Rear console dual cup holder

      I need to replace the rear console dual cup holder in 2010 Hilux SR5. Does anyone know where I can find on utube?
      Coups in Hilux Club
    2. 0

      Ticking Hilux 5le

      Hi all, got a 2004 diesel 4x4 Hilux with the 5le motor in it. 250,000 kilometres, i’m the second owner and have had it about 9 months. Since I bought it there has always been a constant ticking noise while driving (anywhere over 1200rpm) but not while idling. Does it while accelerating, maintaining speed and decelerating. No real impact on power and I get about 12.5L per 100km. I never worried about it too much but it’s starting to ***** me off a bit. I’ll link a video below, any clues what could be causing the noise?
      heath in Hilux Club
    3. 21

      Toyota Echo Mods.

      Hmm it seems like I can't quote anyone except the original post. @Wing (hope I tagged right person) I definitely relate. You did incredibly well with that find! Crazy low KMs!
      Poro in Yaris / Echo Club
    4. 21

      Toyota Echo Mods.

      Is that for the air intake?
      Poro in Yaris / Echo Club
    5. 21

      Toyota Echo Mods.

      Thanks for the post Aldo. Googling echo upgrades lead me to this thread and now I'm a member. I definitely hear you. I've been looking in to turning my 03 Echo in to a soft roader. I bought it for 2k (clear coat was cooked) back in 2021. I managed to lose my license in it within first 3 weeks. I HUGELY underestimated how much up and go it has. Although on fresh tyres, previous owner went cheap. In the wet, driving hard, I was spinning until 3rd gear/ or around 75kmh. Have been playing around with it, looking at suspension upgrades, bash plates etc, even a snorkel 😂 but best I've been able to come across so far would be swapping suspension and wheels from a Jimny or similar. Would require a bit of custom modifications and therefore engineering certificate etc. There already seems to be some great posts in here. Definitely suspension and air flow seme to be the go. Since we have the old cable 🚠 based throttle, unfortunately we can't do drive-by-wire. I was introduced to that by a workmates 06? Hilux 4x2... That thing pulled *HARD* just from changing the mode selected on the DBW. V6 obviously but yeah. Definitely following this thread and gonna pop the air filter next 👍🏽 👍🏽
      Poro in Yaris / Echo Club
    6. 0

      Wheels for Hilux

      Hi, I'm hoping to buy a good second hand set of wheels for my 98' Mk 4 Hilux single cab. Does anyone know if Mk7 wheels would fit regarding the offset please? Thank you, Best, Daniel
      Danzel in Hilux Club
    7. 3

      Removing low beam bulb 2014 Camry

      Just wanted to add this here since I've just been through the very same dilemma and for some reason it's so difficult to find reliable info on the 'net for Australian cars. The globe does just pull out from that holder (referring to OP's posted photos). I was worried, too, and even found someone saying to undo those metal clips latched onto the sides of the plastic body. Mine was tight as anything but just had to grab the glass (it's actually quite strong - but be as gentle as practicable) and just wiggle the globe assembly back and forth while pulling on the globe. Eventually it will start to move a little and just keep wiggling and pulling until it comes out of its socket. What I haven't worked out yet is how to get the new globe back in the headlight assembly (on the passenger side with very limited room) without the new globe bumping into every piece of metal and plastic in that limited space and then how to get the holder aligned properly in the hole and pressed in deeply enough for it to latch (with a twist) back in to place. Possibly I didn't seat the globe down far enough when I inserted it back into that. holder. After that I need to tackle the front parking lights on both sides. So far (per a US video) I may need to go in from the wheel well? Crikey.
      batrachian in Hybrid Camry
    8. 0

      Selling vintage 1996 hilux

      Hey all, currently trying to sell my modified vintage 1996 hilux in sandy tourpe colour . Please message me on 0459246808 for details
      Henry Edwards in Toyota's For Sale
    9. 0

      2020 Corolla service question

      Hey guys! just purchased my first ever Toyota. December 2020 Corolla accent sport 2.0L with 32k on the clock. When I purchased it I looked at the log book and it had a service at 16’000km and one at 32’000km. Not thinking too much more about it after getting it I’ve realised the service between 16k and 32k was 2.5 years apart!! 😫 kilometer wise it’s not too far off but not having a service for 2.5 years is concerning to me as someone who’s very passionate about doing oil changes very regularly and keeping on top of my maintenance of a car! I can’t see any sludge or anything under the oil cap and it looks clean inside but I wanted to get your thoughts on any long term impacts this could have, and any suggestions on how I can rectify it! the last oil change was done about 2 weeks ago and I’ll definitely make sure I do another oil change no longer than in 6 months time. also what’s a good amount of time between gearbox services for a Toyota Corolla (intend to do it more often than what the log book suggests)
      Sean P in Corolla / Corolla Sportivo Club
    10. 7

      Help - Blowing white smoke

      Have you also given the vacuum hose a clean i.e.with a spray of de-greaser. Maybe be also give the throttle body a cleaner which may help to remove any oil related film in the intake. something else that i did was to fit an oil catch can which has since been removed. The real solution to fix this white smoke issue was to thoroughly clean the valve cover and also any oil sludge build up in the valve train. Something else that i did as temporary measure and to confirm that it was oil sludge build up issue was to temporarily disconnect the PCV valve from the valve cover. I taped off the pcv valve so it was unable to suck in an excessive amount of air. I also blocked the valve cover hole opening with some filtering material. The white smoke on start up should stop within a few weeks. If it continues, I would do another clean of the front valve cover with particular attention to the section leading to the pcv valve.
      campbeam in Kluger Club
×
×
  • Create New...

Forums

News

Membership