Jump to content

Gazza's 08 camry on 20's

Pillowpants

By Pillowpants
in Camry Club

 Share

Recommended Posts

Pillowpants Collaborator

Pillowpants

Posted
Posted

This is my new project. So far this weekend, ive installed a set of BC coilovers and these rims. Vossen CV3 20x9 +38 all round.

The fronts stick out a little bit and i need to lower it a bit more, and the rears fit nicely, but will prob add on some 5mm spacers, once ive lipped the guards. Still playing around with it.

post-27274-0-30950400-1333163172_thumb.j

post-27274-0-16484200-1333163336_thumb.j

My RK sport body kit has just finished being made and should hopefully be here in a couple of weeks. That will make a huge difference to the look.

In the mean time, its stereo install time. 8's are in the doors already, but need to sound deaden everything yet. Will start on custom a pillars this weekend too. The boot will be last. 2 x 15's mounted on an Infinite baffle. Then a false floor for the amps. Lots to keep me busy.

post-27274-0-97670600-1333163341_thumb.j
bigVAN Grand Master

bigVAN

Posted
Posted

This is my new project. So far this weekend, ive installed a set of BC coilovers and these rims. Vossen CV3 20x9 +38 all round.

The fronts stick out a little bit and i need to lower it a bit more, and the rears fit nicely, but will prob add on some 5mm spacers, once ive lipped the guards. Still playing around with it.

post-27274-0-30950400-1333163172_thumb.j

post-27274-0-16484200-1333163336_thumb.j

My RK sport body kit has just finished being made and should hopefully be here in a couple of weeks. That will make a huge difference to the look.

In the mean time, its stereo install time. 8's are in the doors already, but need to sound deaden everything yet. Will start on custom a pillars this weekend too. The boot will be last. 2 x 15's mounted on an Infinite baffle. Then a false floor for the amps. Lots to keep me busy.

post-27274-0-97670600-1333163341_thumb.j

Looks great mate !

Hows the bc coilovers? Give your feedback on the suspension thread.

How much did you get it for ?

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

The car? $16k with 34000 on the clock. WA is a bit pricier than over east, but it was the cheapest white one with low k's.

I havnt driven it with the BC's yet, and prob wont untill i get the guards rolled as the rims touch them when i pull outta the drive way.


bigVAN Grand Master

bigVAN

Posted
Posted

The car? $16k with 34000 on the clock. WA is a bit pricier than over east, but it was the cheapest white one with low k's.

I havnt driven it with the BC's yet, and prob wont untill i get the guards rolled as the rims touch them when i pull outta the drive way.

I meant the coilovers lol

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

Yeah I can't wait for it. The bc's were from eBay. I'm not sure they are real or not as they just have a sticker on them and some fancy brochures. Oh, and instructions that have been translated into English, word for word. Hmmm.

bigVAN Grand Master

bigVAN

Posted
Posted

Yeah I can't wait for it. The bc's were from eBay. I'm not sure they are real or not as they just have a sticker on them and some fancy brochures. Oh, and instructions that have been translated into English, word for word. Hmmm.

Ahh I've seen the bc ones on eBay too . They seem alright.

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

Kit finally arrived. The customs bastards stung me an extra $480. I couldnt believe it. I dont know why. Is it just because they are opening it up and checking it? Seems a bit harsh to me. Considering the cost of the kit, the cost of freight, and now this, It better bloody look good on.

Well had the fender lip rolled. I stuffed up as i was heading there to have it done. When i backed outta my driveway, the guard scratched against the rim. Oh well, the damage doesnt look too bad. I had to remove the inner plastic guard in the rear also, as it was scraping on big bumps. Also raised it up a little, so i could run softer shocks setting. The price you pay to look good aye.

bigVAN Grand Master

bigVAN

Posted
Posted

Kit finally arrived. The customs bastards stung me an extra $480. I couldnt believe it. I dont know why. Is it just because they are opening it up and checking it? Seems a bit harsh to me. Considering the cost of the kit, the cost of freight, and now this, It better bloody look good on.

I'm actually studying customs.

May I ask what did they charge you?

Quarantine ? Duty ?

tell me and I'll check my resources if they overcharged you ,or charged unnecessary things.

Cause from memory reece aka 'private number' had no trouble getting it to Melbourne

private number Grand Master

private number

Posted
Posted

Kit finally arrived. The customs bastards stung me an extra $480. I couldnt believe it. I dont know why. Is it just because they are opening it up and checking it? Seems a bit harsh to me. Considering the cost of the kit, the cost of freight, and now this, It better bloody look good on.

I'm actually studying customs.

May I ask what did they charge you?

Quarantine ? Duty ?

tell me and I'll check my resources if they overcharged you ,or charged unnecessary things.

Cause from memory reece aka 'private number' had no trouble getting it to Melbourne

thats because i went through an import agent. They covered all the costs. All i had to do is pay the bill in the end.

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

The kit is really flexible. Do you have any issues with paint cracking on it?

bigVAN Grand Master

bigVAN

Posted
Posted

Kit finally arrived. The customs bastards stung me an extra $480. I couldnt believe it. I dont know why. Is it just because they are opening it up and checking it? Seems a bit harsh to me. Considering the cost of the kit, the cost of freight, and now this, It better bloody look good on.

I'm actually studying customs.

May I ask what did they charge you?

Quarantine ? Duty ?

tell me and I'll check my resources if they overcharged you ,or charged unnecessary things.

Cause from memory reece aka 'private number' had no trouble getting it to Melbourne

thats because i went through an import agent. They covered all the costs. All i had to do is pay the bill in the end.

True,going through a customs broker is much easier,they lodge all the work for you to customs ,all you do is pay them to do it. This is why you get less hassle if you go through a broker

But then again some brokers are dodgy as lol

Martinj Rising Star

Martinj

Posted
Posted

The ride on your car must be harsh, to say the least. Do the 20" rims contribute to better handling than, say, 17" or this for looks only?

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

It definately isn't for performance. The ride is ok at the moment. I'm away at work for a couple of weeks, but when I get home I will keep making adjustments untill it rides firm but smooth. I'm not far off from getting a good ride. Still a little too bouncy in the back.

I probably should've gone with 19's but I personally liked the look of 20's. Maybe I should've just kept it stock....

bigVAN Grand Master

bigVAN

Posted
Posted

Seems you were charged for port fees,which from memory is standard procedures for CFR types.

The seller just pays everything so the goods reach it's destination,after that it is the buyers responsibility .

Which you as buyer ,will pay all duties,customs cost ,etc.

But hey you got your goods,and besides it's only a one time thing :)

Keep us up to date about the kit !

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

Yeah, its done now, so i might as well get on with it.

Im away at work for now, but first thing when i get back, will be paint shop, then carefully fit it on.

Still a couple of weeks away....

bigVAN Grand Master

bigVAN

Posted
Posted

Yeah, its done now, so i might as well get on with it.

Im away at work for now, but first thing when i get back, will be paint shop, then carefully fit it on.

Still a couple of weeks away....

DIY job or body shop.

If DIY tell me how youdo it lol so I can follow

Pillowpants Collaborator

Pillowpants

Posted
  • Author
Posted

nah, pro job.

Ive painted my own car before, but it pays to have good quality gear. So i will leave it to the pro's. Plus its all about the prep work. Paintings easy, its the stuff you do before the paint job that matters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    4. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    5. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    6. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    7. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    8. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    9. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership