Jump to content


Recommended Posts

Posted

So, after a real good service and a new clutch, my Sportivo is driving better than ever. However, with 215,000 on the clock I am wondering if many people on here have changed their water pumps before? I'm not going to change it, just something to keep in the back of my mind I guess.

Also, I know there's a timing chain in the engine, but what about the rubber / aux belts on the car? Is there any recommended k's that they should be replaced before they fail?

Cheers

Posted

I did my pump at 110. Belt at the same time

Dot replace the pump unless it's noisy or leaking

Same with belt unless its cracked

Posted

how do u diagnose a leaking or noisey pump before it starts pissing out water?

Posted

Huh? It leaks out of a little hole before the water pump bearing so it doesn't seize on you, if you pressure test it you will see.. Also grab a stethoscope for noise? Or take your belt off and see if the noise goes away, if it does turn the pump by hand and see if it's notchy..

?


Posted

u dont sound very sure? LOL :lol: mines done 150k, my uncle could find a tiny bit of dried up water around the water pump, he said to keep an eye on it. 6 track days later its still fine :D

Posted

Yeh I had coolant stains to the sump lol it's why I replaced it

I'm sure

But

You always question my replies :P

Posted

as a rule of thumb, same time as the belt :)

Posted

as a rule of thumb, same time as the belt :)

That's mainly to save on labour though, as to change the pump you have to take the belt off on a lot of cars.

Posted

Haha nah its not like that man. If u were wrong idea point it out :P but yeah just the way u replied made me doubtful :P question marks and all. But ur a mechanic so I think u would know more than me. ;) my belt started cracking at. 80000 so I just changed it then. hopefully pump will last another 80000 hehe

Posted

Mine was leaking at 110k cost 260 to replace from a mechanic

Posted

as a rule of thumb, same time as the belt :)

Replace pump when doing a belt? Huh

Are you thinking accessories Belt of timing belt :/ cause this is accessories belt

I wouldn't touch the pump till u see signs of a leak

Posted

My mechanic told me that the rollas waterpump tend to seep a little coolant and that its the norm. He said to me theres no need for me to replace it just yet. I am on 85k klms atm.

  • 2 weeks later...
Posted (edited)

Mine was leaking at 110k cost 260 to replace from a mechanic

That's cheap. I was quoted by Toyota $1,600 because the whole engine had to be taken out. Is this true?

Edited by william777
Posted

Are you for real !?!? No it does not..

All you have to do is take the mount bolts out, 17mm front and back, and the engine mount on the drivers side, you need to lower the engine to get it out, or lower subframe slightly.. I've done it in half an hour

Tell that dealer their cr*p

Posted

Mine was leaking at 110k cost 260 to replace from a mechanic

That's cheap. I was quoted by Toyota $1,600 because the whole engine had to be taken out. Is this true?

Not true , as 123R-Prozak said , thats all there is .

You dont even need the engine removed for the engine mounts to be replaced.. leave alone replacing the water pump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

    4. 0

      Camry Touring 2010 A/C Issues.

    5. 6
    6. 18

      High idling on the 2zzge even when warm (solved!)

    7. 5

      High RPM Idle after the engine warm up.

    8. 0

      Tow bar

    9. 3

      Disconnecting winch, lightbar and UHF

    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

×
×
  • Create New...

Forums


News


Membership