rshippy

98 landcruiser 4.5 petrol

Recommended Posts

Hi All,

is it posssible to pin out codes on a 98 petrol Landcruiser?

My model is a FZJ105R WITH THE 1FZ-FE engine.

I have a problem with it not starting sometimes, i just come back 15 minutes later and it will start no problem.

thanks

Share this post


Link to post
Share on other sites

OBD II blue tooth connector off ebay and install the app in your smart phone.

Share this post


Link to post
Share on other sites

OBD II blue tooth connector off ebay and install the app in your smart phone.

Being a '98 model there's a decent chance it's not OBDII (even if it looks like it has an OBDII plug)...

Share this post


Link to post
Share on other sites

But that FZJ105R production ran from 97/98 - 2007, I say there is a good chance it will work. :)

Share this post


Link to post
Share on other sites

Has a plug at the brake pedal, Will be trying a scanner this week.

Cannot pin out under the bonnet as one of the terminals is not there.

Will post what I find!

Share this post


Link to post
Share on other sites

But that FZJ105R production ran from 97/98 - 2007, I say there is a good chance it will work. :)

Australia did not adopt OBDII protocol until 2006 (everyone sees the US date of 1996 online and think that applies to the whole world - it doesn't), and whilst some overseas manufacturers did adopt OBDII worldwide in the early 2000s Toyota did not until 2006. Cars sold here made after 1996 may also have OBDII-style plugs installed to reduce costs but the wiring and/or software is not present for OBDII diagnostics tools to work.

Has a plug at the brake pedal, Will be trying a scanner this week.

Cannot pin out under the bonnet as one of the terminals is not there.

Will post what I find!

It may look like an OBDII connector but will not be a standard OBDII pinout (Toyota used a proprietary pinout and scan-tool during this period) - is there a diagram under the cap under the dash? If so then pin TE1 and E1 as you would have on the connector under the bonnet (from a quick scan online TE1 is missing from the diag port under the bonnet, right?)

Share this post


Link to post
Share on other sites
On 26/09/2015 at 7:46 AM, rshippy said:

Hi All,

is it posssible to pin out codes on a 98 petrol Landcruiser?

My model is a FZJ105R WITH THE 1FZ-FE engine.

I have a problem with it not starting sometimes, i just come back 15 minutes later and it will start no problem.

thanks

What was the problem ? As I'm having the same issue ? Cheers

Edited by FL33XN

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...