Jump to content

Recommended Posts

Posted

Hi

I have a 1998 Conquest. I am replacing the front speaker. The left front speaker is not producing sound.

The wires between the coupling in the door and the speaker seem ok, so the fault is elsewhere. Does anyone know where I can find a diagram of the wiring from the stereo to the speaker? I am having trouble where the wiring in the door goes, without taking it out of the door and creating a mess.

Can I simply rewire from the fusebox to the speaker, ignoring the existing wiring?

Thanks

Posted
3 hours ago, David Ashton said:

Can I simply rewire from the fusebox to the speaker, ignoring the existing wiring?

 The speaker wiring won't go through a fuse box.

You can go straight from the headunit to the speaker. It is far easier to check for continuity using a multimeter.

Don't rule out a headunit fault either. If it is aftermarket, check for dodgy wiring.

Posted

Thanks Trent.

One further question if I may. How do I get the wiring to the speaker?

 

Thanks

 

David

Posted
44 minutes ago, David Ashton said:

Thanks Trent.

One further question if I may. How do I get the wiring to the speaker?

 

Thanks

 

David

You follow the original path as closely as possible.

Check the original wiring with a multimeter before going to that effort. You can get cheap ones.

Consider professional assistance if this seems too difficult.


Posted

Thanks Trent

The wiring needs to go from the car body through to the door. It's part of the bundle of wires in the door. How do I get it through to the door?

 

Thanks

David

Posted
1 hour ago, David Ashton said:

How do I get it through to the door?

The same as the factory did. It's not a fun job.

2 hours ago, trentmeyer23 said:

Check the original wiring with a multimeter before going to that effort. You can get cheap ones.

Do this first.

Posted

There is a big risk in 'playing around' with the wiring to the speaker - any speaker. It is very easy to blow the particular side's output transistor in the unit - radio or amplifier. In fact it could be already 'gone'.  It is a very tricky job and better handled by a professional auto radio technician.

  • 3 weeks later...
Posted

That should be fairly easy to repair provided there is enough length.

Posted

God news and good luck wishes. Don't let them short with one another.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

    4. 0

      Camry Touring 2010 A/C Issues.

    5. 6
    6. 18

      High idling on the 2zzge even when warm (solved!)

    7. 5

      High RPM Idle after the engine warm up.

    8. 0

      Tow bar

    9. 3

      Disconnecting winch, lightbar and UHF

    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

×
×
  • Create New...

Forums


News


Membership