Sign in to follow this  
Corona mad

Corona ST141 Windscreen Wiper motor relay/controller

Recommended Posts

Just putting this up as it took a while to locate this relay and I had a wreck so could damage the body to remove. Was easy when I could see the back of it.

There's also nothing in the workshop manual.

The auto electrician wanted to rewire the whole thing and create a future nightmare where no  one knew what was what.

In the end I could do it myself.

The front windscreen wiper motor controller / relay is located on body behind the passenger side kickplate - (next to your feet).

Take the cover off and you'll see 2 control assemblies. The wiper controller assembly has a single approx 2" square relay mounted on it.

To remove you'll need a short 10mm jaw spanner.

The assembly is attached to a bracket on the body by a single 10mm bolt. To access this put the jaw spanner up behind the relay onto the head of the bolt.

Turn anti clockwise to undo - you can only do 1/2 a turn at a time.

Once this is undone remove the assembly so you can get at the 2 plastic spring lugs on the back of the relay.

Be careful as these are old and can snap easily

Depress both of these with 2 short flat blade screwdrivers and the relay can be gently pulled out of the socket on the assembly.

I'll post some pics later to go with this description.

This could be a solution to what seems to be a wiper motor problem.   

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this