Jump to content


Need help on changing fog light globes

gOODbOYz
 Share

Recommended Posts

gOODbOYz Grand Master

gOODbOYz

Posted
Posted

After numerous attempts of pulling out the fog light globes i was un-successful.

Can somebody guide me on how to pull out the globe?

I cant seem to losen it.. seems like the globes are stuck.

Thankyou in advice! :ph34r:


CAP Grand Master

CAP

Posted
Posted

So you can't get them to twist at all?

Or they don't come out after you twist?

gOODbOYz Grand Master

gOODbOYz

Posted
  • Author
Posted

So you can't get them to twist at all?

Or they don't come out after you twist?

they dont come out after i've twisted it :(

CAP Grand Master

CAP

Posted
Posted

That's odd, because if you can twist it, you have moved the small rubber ring/seal so it shouldn't be stuck anymore.

Basically they need to twist, and then once the two plastic protruding bits on the bulb are aligned with the two cut-outs/slots on the light housing it should pull straight out...


traumatized Community Regular

traumatized

Posted
Posted (edited)

I know this may sound silly but have you tried twisting it back and forth a few times? Also once you have twisted it twist, it slightly back and then try to pull it out, sometimes the two plastic bits dont quite line up with the groves on a full twist.

Edited by traumatized
gOODbOYz Grand Master

gOODbOYz

Posted
  • Author
Posted

I know this may sound silly but have you tried twisting it back and forth a few times? Also once you have twisted it twist, it slightly back and then try to pull it out, sometimes the two plastic bits dont quite line up with the groves on a full twist.

yeah i've twisted it back and forth, i can twist it about 1-2 cm than it'll lock up again .. but i cant pull out the globe.. this is even harder than changing the headlight globes! :(

gOODbOYz Grand Master

gOODbOYz

Posted
  • Author
Posted

Give Mike a call John. I was with him when he changed his so he has a pretty good idea how to do it.

i dun have his number..

how did he install it when you were there?

did the globe come straight out ?

MR22ZZ Grand Master

MR22ZZ

Posted
Posted

are to trying to do it while the light unit is still on the car or have you taken them off?

it's way easier when they are off the car ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 4

      Leather steering wheel peeling

      Hi My 2021 Rav 4 has that same problem which has never happened with any of my cars over the past 53 years. It’s only done 65,000 km and I’m hoping I can push some acknowledgment while under warranty and hopefully Toyota can get it repaired. Watch this space.
      RoscoG in RAV4 Club
    2. 0

      GR mods

      Hi all, New member here. I just bought a 2025 White Hilux GR Sport. I want to get bigger side steps and keen to see what else people have done to theirs such as fatter tires etc. Mine is white and I will tint the windows. Thank you.
      GRLUX in Hilux Club
    3. 1

      2013 atara r. low torque on takeoff

      hi ihave same sort of problem but wierd turning left or right under some load speed no go take foot off pedal push down again goes off had fuel filter in tank changed didnt fix it my mechanic disconnected battery for 5 mins conected up again seemed to fix it but 4 weeks on starting to do it again only a bit worse back to mechanics on tues for another go at it. if no joy may have to go to toyota dealer $$$ to get them to check it out interested if you get some rsplies cheers
      brian ellement in Camry Club
    4. 0

      I have a bit of a problem with my new to me 2016 diesel rav4

      Hi all, I bought a 2016 diesel rav4 from the damaged car auction, it appears someone went off road and did some damage under the car , the subframe on the passenger side and the 2 brackets that hold it were damaged which was an easy fix but unfortunately they also damaged the oil cooler for the transmission and kept driving it till it stopped , when we took the oil pan off we found metal in the filter so the transmission was toast, we found a replacement trans and fitted it as well as a new oil cooler and after a wheel alignment and a good once over she was registered and good to go. Now the problem i'm having is that I have an information light come up which states " AWD system malfunction ,2WD engaged visit your dealer " and of course it goes into limp mode. We scanned it and it said that the EGR valve was at fault so we checked it out and yes the valve was not great so we replaced it , what the EGR valve has to do with an AWD system malfunction is a bit of a mystery but ok. Then I was driving one evening and braked to do a left hand turn off of the highway , it was moderate braking , not just a touch but not hard either and the same warning came up again, we rescanned it but it was the same fault so was advised to see the dealer. Before I book the car in for any work ( i assume the dealer has better scan tools ) i was wondering if anybody here has any experience with this fault and what it could be ? I was thinking just after i finished writing this , would the transmission need to be programed into the cars computer in the same way as new injectors need to be ? cheers Pete
      NT rav4 in RAV4 Club
    5. 0

      Hi there

      howdy, my name is Pete, i recently bought a 2016 diesel rav4 and we're having a bit of a problem with it , hoping i can find a solution here , I'll post it in the rav4 section. cheers
      NT rav4 in New Members Introductions
    6. 0

      Air Conditioner not workimg

      Air Conditioner has stopped cooling the car. Have had it looked at by Air Conditioning Specialists and they indicated it was an electrical issue. Have had an Auto Electrician look at it and he could not find any faults with Relays or fuses but power is not getting to the compressor. He is under the impression it might have something to do with either a Faulty SLIP Sensor or it would be the Air Conditioning ECU. Has anyone had a similar problem and was there a way to fix it. Thanks
      ROBERT164 in Landcruiser Club
    7. 1

      New in 02

      wow very low ks. good job that should last another 20 years
      adadrian in New Members Introductions
    8. 4

      Engine bay picture

      I use the Torque pro app on my head unit
      Baxter190388 in Aurion / TRD Aurion Club
    9. 0

      1990 Camry sv21 overheating- Rad fan not starting automatic

      Thank you for help in the past! Now again facing some challenges! When the temperature gauge needle moves beyond the middle point, I noticed that the radiator fans are not running. When stop or Key OFF and then ON after few seconds then the radiator fan start running. I am assuming that radiator fan thermo/ radiator switch or fan radiator relays are not malfunctioning. Firstly, I tried to the relays (4pin,5pin). There are two 4pins relay, 1) the 4 pins relay (90987-02004) tested by supplying 12v power and I hear the click sound and tested the multimeter-continuity of the other two legs, I sound beep on multimeter. while 2) the 4 pins relay (90987-03001) did make the click sound, and when tested with the other two legs shows continuity on multimeter-continuity. Secondly, The 5 Pins relay (90987-04002) (2pins on onside and 3 pins on other side. I am not sure how to test this type of relay. I tried to search on google but help on text or video for specifically this model of relay. I tested randomly and found that in set of 3 pins side between Pin 1 and Pin 2, there is resistance (de-energized) and 2pins set on other side, lets says between pin 4 and pin5, there is no continuity. As I energized (12v at pin 1 and ground at pin 3), I hear click sound, there is continuity between pin4 and pin5. I hope it means its functioning though there is not set standard operational specifications to compare. I tested the similar way to all the relays I pulled out and fuses are good. I put all the relays and fuses back. But the same problem as I mentioned earlier, fan does not start when temperature is increasing beyond limit. however, when I start A/C, both the radiator fans start. Same thing is repeated as I mentioned earlier. I do have oil Leake from sides of distributor, but it was there before for couple of years. This time I going to fix with new distributor because last mechanic said that the inner seal he can't fix so I have to go for new distributor. However, I am not sure is this part of the overheating cause? Also, attach is picture of engine area, if anybody can help me locate radiator fan switch in the picture. thanks Any help! Thanks so much
      Krish in Classic Toyota
    10. 4

      Engine bay picture

      Sorry for doing and dump and run I thought I had updated the post. Problem was immobiliser wasn’t talking to the key after all that. I have LPG on the car as well. I was after the picture so I could take that out of the equation initially but honestly wasn’t sure which part was lpg plumbed in. Eventually found fuse box for that to disable. as an aside what OBD2 software people use?
      SirNed in Aurion / TRD Aurion Club
×
×
  • Create New...

Forums

News

Membership