Jump to content

c-one front strut..

XploShun
 Share

Recommended Posts

XploShun Grand Master

XploShun

Posted
Posted

i found a c-one strut...selling for around $150 excluding postage...

is it cheap?

is anyone using this??

which is better? TRD's? or C-one's?


SPTIVO_LUVA Proficient

SPTIVO_LUVA

Posted
Posted (edited)

I have seen ones more expensive but c-one and trd are both legit brands personally i would only buy one if i was serious about using my car as a track car, but thats me.

Edited by SPTIVO_LUVA

vyets Mentor

vyets

Posted
Posted

c-one > trd

in looks that is i duno how they perform :P

c-one front is hollow am i correct? i think the trd one is hollow design as well.

XploShun Grand Master

XploShun

Posted
  • Author
Posted (edited)

was surfing the net this morning at work :P

and found this on japan YAHOO AUCTION

no one was bidding.. with only few hours left...

and it says it will ship internationally, which is DAMN RARE!!!

btw.. vyets... does c-one>trd mean c-one is btter than TRD? hehe

Edited by XploShun
vyets Mentor

vyets

Posted
Posted

does that include shipping as well man

caus i was looking at yahoo auctions as well around 250 brand new but 350 to my door


vyets Mentor

vyets

Posted
Posted

there was someone selling a 2nd hand one on firesport awhile back for 200 :o pretty good too bad it didnt fit my car so i didnt get it hehe

waiwong38 Mentor

waiwong38

Posted
Posted

there was someone selling a 2nd hand one on firesport awhile back for 200 :o pretty good too bad it didnt fit my car so i didnt get it hehe

not worth get small part from japan YAHOO AUCTION if big that ok

and u need pay for bank aust ($28 differnt bank differnt cost )AND japan there +post

i ask some LED thing inside car around $2x-30 AUD each but some ppl who get part from yahoo auction and post here want $80 each

:lol:

YDOIT4 Mentor

YDOIT4

Posted
Posted

The c-one front strut rules i installed it about 2 weeks ago now and my girlfriend even noticed a difference

:o :o :o You dont see that often when a girl even notices a difference with your car

but around corners the car feels alot flatter and you dont lean towards the passanger when turning right thats what i noticed first and so did my girlfriend

Becuase we always used to laugh at each other how close i would get to her around a long right bend hehe

But yea get it man mad price and mad product

#1 i wouldnt say better than trd more or less the same i mean not that much different for regular street use

But of course on track is another thing i havent been on the track so i dont know how much of a difference there is between the different brand front struts

kcorro Grand Master

kcorro

Posted
Posted

both will do the same job as they are good quality. i say if you want chrome go c-one if you want gunmetal get trd. if you check the weight c-one is lighter than trd.

also c-one uses a common 3 piece design which allows you to remove the bar and get at the engine without needing to unbolt the left and right struts.

if you get c-one second hand make sure you get the spacers for it you need 6. trd has them welded on


XploShun Grand Master

XploShun

Posted
  • Author
Posted

hmmmm~~!

even the girls know the difference... damn it got to be good.. :P

then i guess i have to shine up my japanese 1st... before bidding.. :D

well.. hey waiwong... $28 for international transfer? what if ur using a credit card?... they wont charge u, right? :huh:

MR22ZZ Grand Master

MR22ZZ

Posted
Posted (edited)

both will do the same job as they are good quality. i say if you want chrome go c-one if you want gunmetal get trd. if you check the weight c-one is lighter than trd.

also c-one uses a common 3 piece design which allows you to remove the bar and get at the engine without needing to unbolt the left and right struts.

if you get c-one second hand make sure you get the spacers for it you need 6. trd has them welded on

I would disagree... I you want chrome... get CUSCO...

cusco also has the spacers welded to the base of the mounting brackets.

Edited by Blue_Stivo

kcorro Grand Master

kcorro

Posted
Posted

if you look at others like cusco type os is going to be cheaper and also has the 3 piece design. another thing is that the c-one uses the exact same design as brashboy even the colouring so i guess they use the same factory.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Broken wiring --location help

      Look on the block, they are not from a knock sensor, or oil pressure sensor
      CONROD in Hilux Club
    2. 1

      2017 Toyota Hilux 4x2 workmate - transmission issue

      Mate go to a transmission specialist, that's all they work on, day in, day out. You wouldn't go to a dentist for a new pair of shoes The Aisin trans is really durable, have the specialist perform a service, unless the vehicle is throwing a check engine light, don't expect any fault codes to be logged, so I doubt hooking up a laptop will reveal anything, afterall that's NOT Midas specialty, just my 2 bobs worth
      CONROD in New Members Introductions
    3. 1

      2017 Toyota Hilux 4x2 workmate - transmission issue

      Hi I purchased a used 2017 4x2 workmate, auto, which I've owned for over 12 months now. I have noticed an issue with the transmission. First thing in the morning is when it is most noticeable but does happen during the day also. When the ute is about to change from 3rd gear into 4th it revs high as it goes into the next gear. It always seems to be from 3rd to 4th. I was at Midas getting my brake pads changed and i had a good chat to the guys down there about it. They suggested it could be that the transmission fluid needs a flush out. They did show me the colour of the transmission oil and it was apparantly ok but not great (yellow/dirty colour as apposed to red as advised). They said this may help (at about $400) but cant guarantee it and for about $150 they would hook it up to their computer (I'm not sure all details) and take it for a drive and see what the ute tells them. I guess I'm after some opinions on this and do you think its worth spending the money to do these initial processes, which I'm leaning towards. Looking for advice... Cheers Gilly
      Gilly05 in New Members Introductions
    4. 1

      Corrolla Station wagon

      I don't know about Corolla, but I tried to get an Hyundai i30 wagon and was told that they wouldn't bring any in since the demand was so low. Bought an MG ZS SUV instead. Herb
      ozieagle in Corolla / Corolla Sportivo Club
    5. 1

      Corrolla Station wagon

      Would anyone know if Toyota had reconsidered bringing the new wagon to Australia - also does anyone think there would be a demand?
      Collin1 in Corolla / Corolla Sportivo Club
    6. 4

      fuel door spring

      I'm surprised to hear that, Tony, I have a 1995 Hi Ace and every little thing I needed they had,rubber gear shift bushes door seals and other stuff, I can't remember. Herb
      ozieagle in Toyota Commercial
    7. 2

      1999 Vienta V6 won't start

      Thanks Tony Its not my car. It belonged to a family friend who has sadly passed away. I don't think he would have put E10 in it. He was a fairly handy bloke mechanically. I have also been thinking if the battery being flat for some time might be an issue. Maybe there is an immobiliser that needs to be reset? I replaced the battery and have plenty of cranking power. Its a well looked after car and I would like to use it as a daily. I'll check the fuses and then the fuel pump. Appreciate your assistance.
      Tartan in Camry Club
    8. 2

      1999 Vienta V6 won't start

      Hi David, It is possible your fuel pump has packed up. If the fuel in the tank is over 2 years old, especially if it's E10, then it may have compromised the pump and sender unit. (hence no fuel gauge). If you leave E10 fuel in a tank for several years in a car not optimised for it, then that can and will wreak havoc in the fuel system. I hope that isn't the case and it's just something simple. Check for a blown fuse first, of course, then move to the pump itself. You can either elect to remove the pump from where ever it resides as I'm not sure on that particular model, and just apply 12V to it and see if it pumps. Alternatively, you could disconnect the fuel feed line to your fuel rail, place the tube into a bottle and see if it pumps fuel that way. You mentioned if it has a kill switch. You'd know this if it's your car, so I am suspecting it's not yours ? These cars won't have a kill switch unless it's been fitted with an aftermarket immobilizer, which can kill one or two things, Electrical and fuel or just electrical or just fuel. Depends how it's been wired up I guess. You may also no spark. Pull one plug out and ground it to something metallic and have someone crank the engine to see if you have spark. if so, then it's more than likely a fuel related problem. Good luck and let us know how you go. Cheers mate
      Tony Prodigy in Camry Club
    9. 4

      fuel door spring

      I've used Amayama many times for my Aurion and you'll be shocked to know how many parts are already NLA and that's for a 2012 -2017 car. I don't hold much hope for a 2005 Hiace. Maybe a wrecker can help with a replacement used fuel door or as I mentioned, Ebay is always a great source for 2nd hand stuff.
      Tony Prodigy in Toyota Commercial
    10. 2

      1999 Vienta V6 won't start

      I have a 1999 V6 Vienta VXi wagon that has sat for a couple of years. It turns over but won't fire. The dash lights up except the fuel gauge needle doesn't move but I know the tank is full. Could it be a fuel pump issue? Is there a fuse for this? Could there be a hidden kill switch? That's what it seems like. Thanks in advance
      Tartan in Camry Club
×
×
  • Create New...

Forums

News

Membership