Jump to content


Aurion ASC: Has anyone worked out how to turn it off?

mightyrollaman

By mightyrollaman
in Aurion / TRD Aurion Club

 Share

Recommended Posts

avalon Enthusiast

avalon

Posted
Posted

Motor hinted that there is a way to switch it off. Has anyone worked it out yet?

Pop the fuse??

  • 1 month later...
Aurion ZR6 Experienced

Aurion ZR6

Posted
Posted

That not the case, you will disable half of the computer circuit if you remove the fuse, the ESC is work in with the computer circuit, so if remove fuse car will not start.

The car is design around 2 computer circuits.

  • 5 months later...
perthcamry Grand Master

perthcamry

Posted
Posted

Read a letter in Wheels this month. It has a way of doing it buy tapping the brakes and something else. It turns it off till next tiem you turn the ignition.


DKzr6 Rising Star

DKzr6

Posted
Posted

Hey,

THe method below works. But you need to do each time you start the car if you want the TC off. By default it turns back on each time you start the car.

1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

Its a bit convoluted, but i tried it and i works.

dannywss Grand Master

dannywss

Posted
Posted

sorry, i know that ASC is regarding stability and traction disabling/enabling.

ok, out of the topic, may i know has anyone tried disable the "ding ding ding"-sound when you didnt put on yr seatbelt when driving to 20kmph onwards. :help: :help: :help: :help:

p/s: pleaseeee dont say "put on yr seatbelt then", i know but i hate when i m trying to put it on, the sound is just annoying... thanks <_<

dannywss Grand Master

dannywss

Posted
Posted
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

heyhey, impressive, did u try and keep on trying till it works?! or some mech told u? But doing the same way again will enable if again rite?

DKzr6 Rising Star

DKzr6

Posted
Posted
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.

2. Start the engine.

3. Engage the parking brake.

4. Fully depress the brake pedal and then release.

5. Fully depress the brake pedal and then release.

6. Disengage the parking brake.

7. Fully depress and hold down the brake pedal.

8. Engage the parking brake, then disengage it (while holding down the brake pedal).

9. Engage the parking brake, then disengage it (while holding down the brake pedal).

10. Release the brake pedal.

11. Engage the parking brake.

12. Fully depress the brake pedal and then release.

13. Fully depress the brake pedal and then release.

heyhey, impressive, did u try and keep on trying till it works?! or some mech told u? But doing the same way again will enable if again rite?

I found it on a Lexus forum. It was then repeated on another us forum where someone tried it on their Rav4.

You have to follow the procedure every time you want to turn of the VSC. It resets back to default when you restart the car normally.

dannywss Grand Master

dannywss

Posted
Posted
I found it on a Lexus forum. It was then repeated on another us forum where someone tried it on their Rav4.

You have to follow the procedure every time you want to turn of the VSC. It resets back to default when you restart the car normally.

hey hey, can u try find how to disable the seat belt signal? thanks!!

DKzr6 Rising Star

DKzr6

Posted
Posted
I found it on a Lexus forum. It was then repeated on another us forum where someone tried it on their Rav4.

You have to follow the procedure every time you want to turn of the VSC. It resets back to default when you restart the car normally.

hey hey, can u try find how to disable the seat belt signal? thanks!!

Here you go = Try this.

1. turn the key to the ON position, foot off the brake

2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B )

3. turn the ignition to the LOCK (OFF) position

4. unbuckle the driver's seatbelt if it was buckled.

5. turn the key to the ON position. when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds.

6. while still holding the trip reset button, buckle the driver's side seatbelt.

7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.

8. the process should be completed when you unbuckle or turn the key off.

This should disable the seatbelt warning.

dannywss Grand Master

dannywss

Posted
Posted (edited)
Here you go = Try this.

1. turn the key to the ON position, foot off the brake

2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B )

3. turn the ignition to the LOCK (OFF) position

4. unbuckle the driver's seatbelt if it was buckled.

5. turn the key to the ON position. when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds.

6. while still holding the trip reset button, buckle the driver's side seatbelt.

7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.

8. the process should be completed when you unbuckle or turn the key off.

This should disable the seatbelt warning.

If this works, and will stay disable when starting my car next time, i m gonna love u!!! :yahoo: :yahoo: :yahoo: thanks! will try tomorrow morning!

Edited by dannywss
saintly Grand Master

saintly

Posted
Posted (edited)

I'll give both "convoluted" instruction a try and let you know how I go :)

EDIT: Thanks!

Edited by saintly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 8

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    2. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    4. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    5. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    6. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    7. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    8. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    9. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    10. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership