Jump to content


Water in distrubutor

nago

By nago
in Camry Club

 Share

Recommended Posts

nago Progessing

nago

Posted
Posted

Hi all,

I have just put a new water pump on a friends run about car.

It’s a 93 Holden Apollo 4 cyl.

Whilst doing the pump I back flushed the motor, this meant that I disconnected the top radiator hose. When the job was done I only push the top radiator hose on DID NOT clamp it ( what an idiot)

Anyway the next day I filled it up with coolant and started the car after it was idling for say 10 mins and was near operating temp the top hose BLEW off and sprayed water everywhere.

I let the car cool down ,,replenished the radiator and started the car again it started fine but after running for 5 mins it started to miss a bit then it just stopped.

If I try to start it now it has no spark response at all it just wines over.

The timing belt has not slipped off or skipped teeth

I guess may be now water has entered the distributor and fried something, as I have check lots of wires/connections.

I have taken the dizzy cap off and just with a rag tried to clean it up,, but I can’t see any evidence of water.

Has anyone got any idea’s I don’t know much about the parts inside the dizzy that may be fried.

Thanks Gilbert............

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Toyota camry 1995

      Shocks
      macartneyforde in Camry Club
    2. 0

      1995 Toyota camry

      Socks
      macartneyforde in Camry Club
    3. 2

      Muffler change for zr6

      Whats with those small links?
      Baxter190388 in Aurion / TRD Aurion Club
    4. 1

      Brake issues

      BTW forgot to mention that there is no shake in the steering wheel. The 'shudder', really hard to describe but almost like brakes on and off. Cannot identify front or rear or both. Got me totally miffed.
      larry200 in Landcruiser
    5. 1

      Brake issues

      Hi everyone, new to this forum - refugee from LCOOL. Had a minor shudder when applying the brakes. Also was somewhat intermittent. Having over 100k on the clock a lot which were done towing a big van, I thought I may have warped a disk. Checked them with a dial gauge but no useful info. Bit the bullet and replaced all 4 with new slotted rotors and pads from DBA. Huge difference in braking. However the shudder has return almost with a vengeance. Thought I fixed the problem when I disconnected the ECU for another unrelated issue. ECU is remapped, car went in limp mode and could not clear it with the scangauge. Problem not fixed and I am lost as to why this is happening. Plan on visiting Berima Diesel later on this year to have the injectors checked and I'll get them to look at the brakes if I still haven't figured it out. Any suggestions would be welcomed. Thank you
      larry200 in Landcruiser
    6. 1

      Hi, I'm Magazi in NSW I'm a new member

      G’day and Welcome Maga I’m new here so Sorry can’t help but thought I’d say 👋
      Sparky600 in New Members Introductions
    7. 2

      Muffler change for zr6

      To my knowledge depending on the year off npp exhaust it's already done factory. snaptube vidmate
      ablaeh in Aurion / TRD Aurion Club
    8. 2

      IAC for 1997 Camry Vienta (3vzfe)

      Ah I see, I had no idea aisan was related to toyota. I initially thought it was clone of aisin or smth
      ASHX in Camry Club
    9. 26

      200 series won’t shift past 4th gear

      Hi everyone, new to this forum - refugee from LCOOL. Having read some of the replies, to the best of my knowledge there is no such thing as a minor remap. Toyota in their wisdom have the software in the ECU such that it cannot be downloaded, modified and reloaded. It has to be a complete reload, either stock or modified. All you fellows disconnecting the battery is a good and simple way to try and reset everything but similar results can be achieved by simply disconnecting the ECU. That's the big plug in the firewall passenger side. Meanwhile I may need to start a new topic for the following issues I am experiencing: Had a minor shudder when applying the brakes. Also was somewhat intermittent. Having over 100k on the clock a lot which were done towing a big van, I thought I may have warped a disk. Checked them with a dial gauge but no useful info. Bit the bullet and replaced all 4 with new slotted rotors and pads from DBA. Huge difference in braking. However the shudder has return almost with a vengeance. Thought I fixed the problem when I disconnected the ECU for another unrelated issue. ECU is remapped, car went in limp mode and could not clear it with the scangauge. Problem not fixed and I am lost as to why this is happening. Plan on visiting Berima Diesel later on this year to have the injectors checked and I'll get them to look at the brakes if I still haven't figured it out. Any suggestions would be welcomed. Thank you
      larry200 in Landcruiser
    10. 7

      which engine oil

      I been using nulon w5-30 fully synthetic long life and good on fuel change oil every 5000kms to keep it clean all d time
      alan de Leon in Kluger
×
×
  • Create New...

Forums

News

Membership