ok for the door pods/spacers... this is what i did in my sisters car... (2001 AE122R) obvioulsy take off doortrim and drill out the rivets of the metal mounting brackets... get yourself some 9mm mdf and trace the mounting bracket onto the mdf and cut it out... you will have sort of a triangular shape... cut out ur speaker hole next... line up the existing holes and drill them into the mdf, use some small bolts, or small screws with small nuts and secure the spacer into place, screw ur speaker in an voila ur done. also, 9mm was used according to he depth of her speakers, find out the depth of urs before using 9mm... in our case this cleared the window mechanism aswell as the inner ring on the doortrim... (turn over door trim and ull see the inner ring i m talkin about, this "butts up" against the foam surround of the metal bracket, u following?) before i mounted the spacers i gave them a coat of "clear" from a pressure pack can to make them water proof... i also have 2 spares that are waiting to go into my others sisters corolla, (2000 AE122R) (same model) so if i can find em, ill take a pic and show u the spacer... ALSO TAKE NOTE: the triangular spacers are not symmetrical so they HAVE to go on a certain way, to match the contours of the inner door skin. and i *think* left and right sides are slightly different. hope that helps u... heres a pic of the finished product... with speaker mounted... if u need pics of the actual things then let me know... fairly basic really... please post any comments or questions regarding my method or finished product EDIT: Pics wont work...? dunno wot the go is there...