-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Tutorials
News & Articles
Videos
Posts posted by re99ie
-
-
Also being that the car/motor is earthed better u may see a few other benifiets in using an earthing kit, these include : Brighter Headlights, More Power from motor, Easyer starting due to starter motor being better earther And audio benifiets with better grounding for head units/ amps etc
After reading all the pros and cons of earthing kits, I don't believe they provide any advantage and its more for just bling and gimmics for a car.
The only time it will be useful is when the engine has been removed out of the car for rebuild or replacement. Also late model cars have more than one earth source for the engine.
A good battery or a voltage regulator are a better investment IMHO instead of more clutter in your engine bay.
-
This has been done before....at Altezzclub.org.au which I'm a part off have this DYI.
http://www.altezzaclub.org.au/diy/rear_fog...brake_light.pdf
If you wish to do the same to your car, feel free to use this as a starting point but please read the disclaimer at the end of the document before starting.
-
spotted a P-Plater on a Black Sportivo with red time attack black wheels at the stop light next to Woolworths Petrol Station at Camden Valley Highway. heehehe stalled it when he got the green light
-
I was there for a little while, never seen so many 86's before.. HAHA
you should have seen the HR first ever meet last year...20+ hachi in one area...was a good meet as well.
I hope the next SWAP Meet will be even bigger.
-
-
11
12
13
14
15
16
17
18
19
20
-
Posted on behalf of Matt Mead.
1
2
3
4
5
6
7
8
9
10
-
Hey, aren't u the fella who own that nice IS200 in yellow?
sure am B)
-
That's one ultra rare kit you got. And I cannot even recall seeing the fog lamp for it either.
And I think that kit got the best rear spoiler too.
It should be the only one in Australia right now. I'm soo tempted to buy a celica just because of this kit. I've been eyeing out carsales to see if there is one forsale with that colour
-
That's the Celica Tsunami edition bodykit isn't it? How did you managed to get that?
Fo Shizzle ma Nizzle!!!
Complete Tsunami kit only sold in Canada and US.
Just say it was meant for a Celica in a previous 200X Motorshow but realise Toyota is not bringing the kit here.
-
Might be a stupid question, but we dont have to be a seller to come and buy stuff do we?
it is an open invite...browse, buy, sell...just make sure you flag it to the organiser if you wish to sell stuff - it will require them some logistics to make sure everyone have ample room to sell their stuff.
-
i hope you guys had fun, i just got back from a night out at cronulla. wish i coulda been there. no1 fell into a ditch right?
=)
Everyone got through safe.. lol
I got stuck at a traffic light just before the run, so didn't see anything that happened up front
Everything up front was good, was quite enjoying watching cappa bounce around on the bumpy parts and disappear on the smooth :P
Good turn out with about 6-7 cars and there was only one sportivo!!!
Reason why I actually prefer to take the Corolla through RNP....I know if I Corolla I know for a fact the RX8 would not of gotten far (up tell that straight I was loosing in the corners in the cappa and I wasnt even pushing hard )
But yeah I love that smooth section if you couldnt tell :D
lol...hitting the late night spirited driving again?
-
Be careful with fibreglass kit, and no one seems to like Carmate either.
I did however saw a very nice TRD replica which completely fooled me into thinking it was an authentic TRD as the weave is perfect smooth. Shop around for replicas, I am very sure there are very nice quality replicas around.
But if A+ quality is mandatory, then it is unfortunate because TRD kit is discontinued. Call up Toyota see if they any stock left, but I am sure the front bar is not in stock anymore. Side skirt, rear valance, high spoiler and front lip may still be available.
Good luck~!
most of the time the Replica needs to be slightly modified to provide perfect fit. I suggest try to find the original as possible.
If not, I do have this kit sitting in the shed waiting for the right car to come along
-
MDTC looks soo much fun...did you go there with the CC crew?
-
try going to http://www.toymods.net/forums/index.php
there are plenty of help in there as well.
-
my latest adventure....with some very wealthy companions
Got invited to a Burrows Drive Day at Eastern Creek. My first ever drive there.
No timing allowed but using incar video footage and Ulead DVD MovieFactory timing, I've calculated that my fastest time is around 2m19s on Federal 595.
sorry about the wind noise..forgot to turn on the windcutter.
-
80 Regino De Guzman 1:21.8840 1:20.3020 1:19.6620 then they switch it off :(
That really ****** me off too! comparing I know I cracked the 1:20 in the Cappa but I got no proof! :(
Welcome Reggie!!!!!
It is very fustrating, good thing I have this video to prove it and was able to get the time out of that.
-
thats nuts man, nice car as if make it a track car!!
cheers...it is the only safest and sure way to know if all the mods work properly....it will be tested again at Eastern Creek next wednesday
-
if you are after semi slick, use this as a guide...I found RT615, A048, and R888 have a similar measurements and allowable rim size
-
nice drive on the track, seems like youve done it quite often
and so is mowing their lawn
I went from 1:22 to 1:18.8 in 4 track days. But IMHO, the last two track days is the most improvement personally as the car was kept at the same spec with no modification. An improvement of 1 second from 19.7 to 18.8 which I'm pretty proud to achieve. Also bear in mind that the car is just over 1.5tonnes and 86rwkw.
-
how much would it be to sandblast and powdercoat 17s and is it a one day job ?
I doubt it will be...I've heard Neals wheels and Magman can take upto a week to get a set of wheels sandblasted and powdercoated.
Some like Neals wheels subcontracts their sandblasting.
but I'm also looking for someone that can remove gutter rash as well.
-
What spring rate are the coils?
they are 12/200 fronts and 8/200 rears. kilo/rate i think.
Also, I had the camber at neg 3 all around
see prior track setting before we put it back normal daily drive setting
-
Saw this car at the mid month meet.. simply stunning! good work mate =)
thanks
BTW,
My last trackday (running on Federal 595)
http://www.natsoft.com.au/cgi-bin/results..../2008.WAKE.S3.I
80 Regino De Guzman 1:21.8840 1:20.3020 1:19.6620 then they switch it off :(
-
Brad-dreama..... What are you looking to do?.... As in Powdercoat/Sandblasting?? Give us a shout. I might be able to help.
I put a picture here to see if your interested ....... Just a demo spring for my desk in "Crystal Jade"
Cheers
SILVERBACK
How big of an item can you sandblast and powdercoat? and are you able to organise the removal and reinstall tyres?
upgrading rims from 18s to 19s on a 96 toyota camry
in Wheels & Tyres
Posted
use this link to calculate the difference
http://www.1010tires.com/tiresizecalculator.asp