hAmZ
-
Posts
121 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Tutorials
News & Articles
Videos
Everything posted by hAmZ
-
yeah the bc are fine for street use, cant comment on track use though. I got the bc rm model which you can read the specs on here http://www.bc-racing.com.au/bc-racing-coilover-suspension-kit-toyota-corolla-zze123r-zze130-nze121-01-07-c-02-ma.html I meant I replaced my actual axle beam which connects to the rear hubs not the sway bar. people tend to get either whiteline or ultra racing
-
Get it from eBay. I got a couple cases for 10 dollars and put the insides in then got the new key cut. Or you convert to a flip key also which uses the same internals from your old key
-
i read the other thread in suspension where people noticed a bit of a difference. i did end up getting them but the nolathane brand were not the correct part(46290), so i didnt install the rear axle poly bushes. i did however install a new torsion beam and a set of bc coilovers which improved handling a lot
-
are there still active members here? a quick quesiton has anyone used nolathane bushes as i plan to purchase them for the rear of my sportivo rather than ordering energy suspension ones from overseas. about $70 from aus vs about $150 shipped from overseas is this the right part? kit looks different compared to energy suspension nolathane 46290: http://www.nolathane.com.au/product_detail.php?part_number=46290 energy suspension 83121: http://www.energysuspensionparts.com/proddetail.asp?prod=8.3121 thanks
-
hey all just after a spare corolla sportivo rim, or maybe a pair. brissie would be good. thanks
-
.
-
price drop to 150
-
1. Alpine cda-9857 headunit $100 In very good condition, does everything you need, a lot better than some of the newer stuff today. 3 rca inputs! one specifically for sub control Ipod control capability Missing harness but can easily be sourced for cheap 2. Alpine mrp-m450 monoblock $150 Vgc, great little underrated amp pushes 400rms @ 2 ohms 3. MTX 12" thunder 5500 series sub in a box $50 300rms sub has some cosmetic marks Used this combo in my stivo, sounds great and pumps hard Located westside brisbane
-
Have a set of corolla roof racks off my 05 rolla. would say they fit 03-05 corolla brand is rola they're about 300rrp $180 $150 ono pickup brisbane westside
-
hey mate they will fit your 05 model. im not quite sure on how much they cost to get ported in ur state but the guys from nsw will b able to help you. Im guessing about $200 or so to port + labour to install or you can do that yourself.
-
bump, still sitting in my garage
-
Be in the market soon for a 05 corolla sportivo May consider an 04 model. In brisbane, will travel to gold coast for right vehicle Send me info/links thanks
-
Fs: stock sportivo headers with erg block offs will fit all 03-05 sportivos good chance to get ported headers without having your car off the road for long! get these ported and then get them swapped over with your headers! then sell your stock ones bought them off a member but never got around to getting it done. $150 posted. $120 pickup. located brisbane southside, prefer pickup
-
dynos can also vary greatly along with cars. if it was done on the same dyno, same day and condtions then it would be some what comparable.
-
dug up the email from ces RRP $549.00 incl. GST [ * WITH EXCHANGE TRADE] OR RRP $915.00 incl. GST [WITHOUT TRADE EXCHANGE]
-
if i remember correctly ces headers are about 550 or so for exchange or 950 with no exchange. yeah i saw your fs post. i was too slow
-
hey all im looking for recommended workshops in brisbane to port my headers. i would prefer if they have already ported some 2zz headers before. tried searching the forum but have only found recommended interstate places. i know ces are up here but i cant afford that, plus i just bought stock headers. thanks
-
you can go have a little talk with the pedders dude
-
im assuming you installed them yourself? if so and you havnt driven your car yet, take it for a drive and see if it makes a difference.
-
do you look at the part number and check if it's the lowered one? and have you driven your car after lowering yet? mine didn't lower until i moved my car
-
for the 1zz... hmm probably any of those listed will do the trick, just depends on your budget i guess i recommend ces intake for the 2zz
-
just the fronts. i had 205/50/16 potenzas 35 psi had me hopping/ axle tramping through 1st to 2nd on launch 22psi was good. gripped pretty much straight away
-
you're best to install it yourself! its easy, plus there's a guide or 2 on here with pictures. would only take 1 - 2 hours tops otherwise any mechanic should be able to install it for you.
-
With the work your getting done you should go for a whole new exhaust... 2.5in all the way. yeah i was after a 2.5" muffler with tip. they dont make any 2.5" inlet mufflers with tip. i see plenty universal mufflers that are 2.5" though. another source also says the same thing about the 2.25" > 2.5" thing about the magnaflow mufflers. any other input from anyone else? i may end up getting it
-
i ran 20-22psi on the strip, recommended by a mate. hooked up pretty good!
