Jump to content

offzide93

Regular Member
  • Posts

    24
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by offzide93

  1. Late comment, but yes, the FTO guy was an idiot, but his fail was funny 1. Failed to do straight line burnout 2. Instead of spinning wheels, he was burning clutch most of the time 3. He doesn't know how to replace and/or tension his drive belts 4. homo
  2. Just read through this thread. Awesome car ! How different is the 20v from the 16v ?
  3. Hey man, good to see another 20v going into another aussie rolla ! :) Umm, I didn't do the wiring on my car (gave it to someone else to wire it up), so i'm not sure, sorry man. My A/C is in there, but i just need piping to go OVER the extractors, and to the A/C compressor, as my current 4A-FE ones foul on the extractors. I may just get piping fabbed up, or I may have to switch over to 4A-GE 16V A/C lines (if they line up). Actually on that topic, if i may ask, is your car an AE92 ? If you're using the 20v A/C, do your standard A/C lines line up to the compressor ? Actually, over on the Twincam forums, I'm sure Matt on there has posted up wiring diagrams and a walkthrough (sort'a thing) of wiring up a 20v, so that may be of some good help. :) Haha, sorry for the late reply (I don't frequent TOCAU much) ! Haha, if my car had often track duties, I'd swap the wheels, but I don't track it as being a student, I can't afford :( It's possible that the more polished look can make it look lighter too!
  4. Here's a happy snap of my 20v swapped AE92 CSi LTD Hatch :)
  5. Had a go at polishing the dish of the OGs. Not the best as i was doing it by hand, but definitely an improvement from before. Didn't take any before pics, but it has a slightly more mirror-like finish than at first. Pictures:
  6. Spotted RO-11-ER On City West Link Rd entering Victoria Rd at around 11:30pm - 12:00am earlier.
  7. Which is why my suggestion to a new thread for each EOMM would be better (organisation skills level 85) But each to their own I suppose X2 I agree, a new thread per each EOMM would be alot easier to understand.
  8. Okay, yes this is very confusing. First, you said that it was the normal time/normal meet, and now it's a brunch meet ? If something's going to change, it would be helpful if the new time and new location was more specific. If it's left to the last minute, I'm sure a few people on the list will have to drop out as they'll be busy during new time.
  9. Damn, that list grew pretty quick in the past two posts :o Repost list with correct spelling of my username: 1. M.C 2. Juvenile 3. Clifton 4. VF-X [Dpending on when] 5. WS Echo (Saturday nights are good for me) 6. OHY34H 7. Ronnyboy (Maybe) 8. Brendan (Most likely) 9. ZR6XY 10. RO11ER 11. offzide93 12. synthetic05 13. cruzer 14. Seby123 15. riversandlakes (maybe)
  10. Little and only update in the past few months (besides oil changes): Rear camber bolts. Installed and dialled in some neg. camber. Will get it properly aligned later.
  11. Lmao, exactly what I thought. I saw the list but i'm going to be expecting 10 - 15 cars. Would be great if all 20+ could make it though !
  12. Thanks man :) Umm, I think it was all completed over a period of about 3 months but it was mainly on and off work. I had to wait till my TAFE holidays to finish most of it. Haha thanks, but most of it was my older bro who has experience with this. I was just learning as I go :)
  13. Specs: Performance: - 4A-GE Silvertop 20V S2 - TOM'S Carbon Fibre plenum with TOM'S trumpets - Rebuilt with full gasket kit - New piston rings - TRD 0.8mm Headgasket - All bottom end bearings replaced with King items including thrustwashers - Full rebuilt and serviced head - C56 gearbox - APEX'i Power Intake Panel Filter - 2.25" Catback Exhaust - 20mm Adjustable Rear Swaybar - SX Front Strut Bar Interior: - AE101 Levin steering wheel - nothing else worth noting Exterior: - PB standard colour - Optional Electric Sunroof - Colour code grille, side mirrors and windscreen wipers - SX spoiler moulded onto tailgate - Lowered on King Lows-front and King Superlows-rear (yes I know, but I wish I had coilovers) - Axis OG San Mesh - 15x8 +25 4x100 w/ 195/50/15 Firenza ST08 - Honda Accord mid-90s model front lip
  14. After a few months, I got sick of the 17s, and opted to go for something smaller preferably weighing less. I then sold the Lenso GF7s and bought SX stockies to roll around on. It was noticeably slightly quicker, but had like no grip (was horrible to drive in the rain :L). I bought AE092's blackened headlights soon after and modified a Honda Accord front lip to fit. At this point: After rocking the SX stockies for a while, I purchased the new set of wheels i've been after. They're Axis OG San Mesh in 15x8 +25 w/ 195/50/15 rubber. Here are pictures, and the latest ones up to today. :) Needs a little bit more neg. camber on the front ..aaand here's a hectic excel creeping in the photo :L
  15. After that, we began stripping down the engine bay and rippin' out the ol' 4A-FE, to mount in the 20V. Seemed to fit like a glove, besides the driver side engine mount needing shaving down to clear the cam covers. Finally complete :D AE101 washer bottle and power steering setup: Car looked like this at this point:
  16. We stripped the motor back, rebuilt the whole motor and serviced the head (specs are written up below). I also attempted to polish the cam covers which turned out half decent, but not that good.
  17. Hey TOCAU ! The name is Paolo, and i'm new to TOCAU (I went on your Sept EOMM rockin' SX stockies) This is the latest picture of my AE92 Hatch: Car was passed down to me from my older brother, and I learnt how to drive in it. It started off with a 4A-FE, C52 gearbox with lightened flywheel and Exedy HD clutch and lowered all round on King Lows w/ white Lenso Drive-X7s in 17x7 +40. At that point, it looked like this: After a while, I added a Whiteline 20mm adj. rear swaybar, did a rear drum to disc brake conversion, upgraded the audio(uprated the rear 6x9s and the front 4" speakers, and added a sub in an enclosed box), added an SX front strut brace and changed the wheels to Lenso GF7 17x7 +40. By then, it looked like this: After a while, I purchased an AE101 Levin GT Apex Half-cut to prepare for a 4A-GE 20v Silvertop conversion as the old 4A-FE was getting tired with 200K KM on the clock. I was lucky to pick this particular Half-cut up as it had a rare TOM'S CF plenum with TOM'S Trumpets inside them :D
  18. 1) BG Pete (Iron Chef) 2) Riverandlakes 3) juvenile 4) ZR6XY + the twins 5) Seby123 6) Dazzle [Depending on date] 7) Ronny (Maybe) 8) LFT-00F Pending my car gets fixed 9) flipsta24 10)ohy34h 11)Offzide93 In ! Will just be my 2nd meet with you guys.
×
×
  • Create New...

Forums


News


Membership