Jump to content


whitezr6

Regular Member
  • Posts

    234
  • Joined

  • Last visited

  • Days Won

    8

Everything posted by whitezr6

  1. this is 19x9.5 et42 245/35 tyres on coilovers sat flush to guards yours would stick out 7mm more https://www.willtheyfit.com/index.php?width=245&aspect=35&diameter=19&wheelwidth=9.5&offset=42&width2=275&aspect2=35&wheel_size=19&wheel_width=9-5&offset2=35
  2. cbf searching forums, but seems pedders coils are rebadged BC racing coilovers, $2k vs $1.2k however with pedders you get local support if something goes wrong correct me if i am wrong :)
  3. push the black boot open button near the number plate, should open since key is right there? edit - LOL
  4. gates sells a adp for the 2gr-fe, if oem is too expensive http://www.ebay.com.au/itm/301863737633?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT however I have not double checked if this is the exact same part as oem... I would contact the seller first
  5. ALTERNATOR DECOUPLER PULLEY?? There's a vid on YouTube showing what it sounds like when this part goes Goodluck
  6. not sure sorry, I only have experience with 2006-2008 aurions. are these oem headlights? you may need to adjust the beams
  7. No worries, Altogether I have bought 4 kits lol, the last pair were the patent Phillip bulbs and hylux can bus ballast
  8. I have bought the second HID kit it only lasted 1 year before the bulbs went, purchased another set from the same company, same thing I purchased from this site at least 2-3 yrs ago, still going strong http://www.point-blank.com.au/HID-Conversion-Kits.html Edit seems the top ebay kit is the same as the one from point-blank but cheaper
  9. no worries Before I got the 19x9.5 I was on BC racing coilovers Before the coilovers I was running 20x8.5 et38 on stock shocks and pedders lowering springs hope this helps
  10. lowest part, exhaust I think is 100mm from the ground, so front side skirt is like 110mm from ground, and rear side skirt is 140mm from ground sorry no idea how much of a drop from stuck as I had it low but had it raised 10mm, pedders installed the coils, there is a significant wheel and guard gap only on close up
  11. Wish i could but wheels are flush to the guards, I think anything above 245 would start rubbing :(
  12. gf studies there :) I drive everywhere just like you lol
  13. https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10609639_10203099791989861_1403710970986793227_n.jpg I see you lol, you go to curtin?
  14. hey mate, its 2 steps for me when i start the engine/ignition on and wish to have the DRLs on, I have to turn the parkers on, then push the switch thats how the auto-electrician wired it up but if I had it dialled to parkers beforehand, and then started the engine/ignition on then the DRLs would also turn on So if I had headlights on, I have the option of having the DRLs on or off, I tend to have them off when the headlights are on generally I hardly have my DRLs on anyway lol
  15. 12" sub https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10484258_10202832561389263_8950254295486468727_o.jpg Genuine look DRL switch https://scontent-b-lax.xx.fbcdn.net/hphotos-xfp1/t31.0-8/10443150_10202832561589268_2430829314378239653_o.jpg Red Hella Super tone horn speakers https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/1912412_10202832561549267_3149743566306946550_o.jpg Thats it for now :)
  16. Installing today :) https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/1537849_10202739921753330_6520679655328809686_o.jpg
  17. excellent!, cant go wrong with 5 spoke concaves
  18. DBA 4000 crossdrilled and slotted rotors + QFM HPX pads all around https://scontent-b-lax.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10341607_10202696544068915_3604515382880502345_n.jpg https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10400768_10202696544148917_3928496719092409097_n.jpg :)
  19. -http://www.ebay.com.au/itm/Clear-Sportivo-LED-Tail-Lights-for-TOYOTA-AURION-TRD-/130490926816?pt=AU_Car_Parts_Accessories&fits=Model%3AAurion&hash=item1e61dd86e0&_uhb=1 http://www.ebay.com.au/itm/AURION-XV40-2006-2011-LED-Tail-Rear-Light-Red-Clear-for-TOYOTA-/360582732313?pt=AU_Car_Parts_Accessories&fits=Model%3AAurion&hash=item53f467da19&_uhb=1 http://www.ebay.com.au/itm/Aurion-2006-2009-LED-Tail-Rear-Light-Chrome-TRD-TOYOTA-/320730501445?pt=AU_Car_Parts_Accessories&hash=item4aad071145&_uhb=1 -http://www.toyotanation.com/forum/104-5th-6th-generation-2002-2006-2007-2011/347378-2gr-fe-turbo-pics.html http://www.toyotanation.com/forum/104-5th-6th-generation-2002-2006-2007-2011/315212-turbo-camry-gen-6-6-5-v6-gen6-i4.html -https://www.youtube.com/watch?v=gOJtmplXTg4 -bought from U.S. (supplier sent me a broken hose clamp, had to walk to bunnings so I could attach the pod filter lol) -http://pbbrakes.com/brake-kits/toyota/aurion.html have fun
  20. wish I had the $$$ only can dream with 245/35 would the coils->tyre clearance be more than enough? guards not rolled,currently no tyre->guard rubbing, dampeners are on setting 8 or 9 from hard earlier the frame rails were 85mm(raised it 10mm, now want to re-lower 3-5mm) from the ground and didnt rub even with 5x65kg+ people in the car http://www.willtheyfit.com/index.php?width=235&aspect=35&diameter=19&wheelwidth=9.5&offset=42&width2=245&aspect2=35&diameter2=19&wheelwidth2=9.5&offset2=42#content 245/35, not much bigger than 235/35 it seems
  21. Hi all, just a few questions on fitting tyres on my 2008 aurion zr6 Currently 235/35 on 19x9.5 et +42 running altenzo tyres wheels sit flush to guards Now I am looking at better performing tyres than the altenzos which were $196ea Looking at spending $300-$400 However with the tyre size 235/35 there is no other tyre with a load rating of 93+ that I could find, vendors or internet my dilemma is going upto 245/35r19 (plenty of 93+ load rating tyres) with my current setup: Rears: (fronts plenty of clearance) https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/q83/s720x720/10361597_10202578477077314_1038612881821041753_n.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/q71/s720x720/10325271_10202578476077289_9094858899292073190_n.jpg https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/q71/s720x720/10306084_10202578475997287_8694977119120273322_n.jpg https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/t1.0-9/q79/s720x720/10325790_10202578476437298_1158686365089823001_n.jpg Will I have any issues going from 235/35 --> 245/35????? Also looking to lower till the frame rails are 100mm from the ground Thanks for any advice/suggestions Juan. ps. looking at doing some test fitments at a local shop, just would like some/an idea's before booking it in
  22. minor update: https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/q81/s720x720/10297904_10202509067822126_9181732957475435560_n.jpg https://scontent-a-sjc.xx.fbcdn.net/hphotos-prn2/t1.0-9/q81/s720x720/10308731_10202509067222111_1926644415375625815_n.jpg just waiting for front and rear 4000 series cross-drilled and slotted dba's + qfm hpx pads from GSLrallysport :) relowering by 4-5mm thanks for viewing
×
×
  • Create New...

Forums


News


Membership