Cbr600

You could had mine for 600 ...

Location what do you do for work ?

Location ? In based in Narellan Nsw i have yellow speed racing fitted . i run 8/5kgmm come for a hack.. drop me a pm

Use a long screwdriver and check your tensioners. put it against your ear - you'll hear a bearing if on its way out

Has any one got the old resonator and or cat they don't want ?

1.5" headers into Collector Front 47.97mm Collector Rear 49.8m 1.5" D into y pipe into 2.25" flex (the outlet flex out is 2") thru resonators / 3rd cat into 1.75" y pipe into rear mufflers 1.75 " outlet

Sorry to dig up a old thread, my wife's 2015 oem Camry has 2" exhaust going into 2 x mufflers 2" in and 2" out, which makes them bigger then our Aurion's oem mufflers. If some one works at a muffler shop Maybe you can check to see if they cross reference to fit ??

Hi Wayne drop me a line 0422948007

I used to have a Holden nova. Carny auto . I rebuilt and Fitted a 4age red top with blue top cams and messed around with the sensors So it kept on giving it a heap of fuel. I kept on adding timing until it didn't ping at idle. It had a. 20v c52 limo diff box from a black top which I managed to get my hands on whilst working at a import shop. New superpro bushes all around and up rated sway bars front and rear will make it Into a new car to drive, I used to run 3deg neg camber on my Corolla, and I still used to chew the outer edges of the tyres around. It was super quick thru the corners and went thru tyres and brakes about every 6 months. I ran ae101 coil overs in the front and Kyb and jumbo springs (Liverpool) on the rear. 1.5" lowered all round to keep normal look. Where is your location and what's your driving style why are you wanting to upgrade? If your smashing corners 247 I'd stay away from pedders and get coil overs so they can be rebuild at a fraction of the cost. Drop me a pm For further info.

Toyota sealed system is a superior system, as it's very hard to contaminate the system which means a longer service life. Even though you have to undo a gearbox mount to get the Trans sump off to replace the filter. ( the engineers should have added a cut out in the cross member ) This situation could have been easily avoided if your mechanic followed the procedure. I'd be passing the costs on to the person that did the Trans oil. Your lucky it didn't blow the front seals out , then that's a gear box out job.

Wesfil filter kit WCTK134 according to the web site .. I refilled mine with gulf western oil SYN TS 2.8L

My wife's 2014 Camry sx, the exhaust outlets are bigger then the Aurion by a bees ***** ... Maybe a Toyota parts guy can confirm parts numbers and interchangeability?

What shop did the engine ?

Was this a dyi or a shop did it ?

What's dpr and a gse stand for ?