Old man

Does any know if the Kluger 2018 can be program to have all doors lock when the vehicle reached 20km/hr? I have read on the US forum that the Highlander can be programmed. I have tried with my car but with so success. I have not asked Toyota service department yet. Apparently, us model can be set using the vehicle setting on the media system.

Stay away from kmart or any other servo. Toyota price seem a bit high, i had mind t-belt done for 600. Shop around different dealers

Search "speedkar99" on youtube, he got a video on replacing the valve gasket which include Egr removal part. Cheers

Update- replaced it. Access is only possible from under the car. I used a 7/8 or 22mm wrench to loosen the sensor, after that it pretty easy. Cheers

Hi guys, I need help to replace my air/fuel sensor on my V6 1MZ-FE engine, this sensor is located at bank 1 sensor 1 after the firewall. I do not want to remove my intake plenum again as i just replaced my knock sensor and valve gasket. Has any one change this sensor out by accessing from under the vehicle? Code error is P0135 (O2 sensor fail bank 1 sensor 1) -i believe this is the air/fuel sensor. Any help is appreciated. Thanks

Hi Andy, I'm worried when you say you have no clue how to install the HID light. The HID are almost pug and play system and don't require to much wire cutting as such. I don't want you to damage your car electrical system trying to install them your self, may be it is best if you could ask a friend that have knowledge to help you. I am more than happy to guide you through the process if you take some pictures so i can tell you what to do. Any way that website is good but I have another guy that sell them here in Aus and he sell them quite cheap. I bought one set from this guy before and it has been running good. To find this seller, go on to eBay Australia and search for Vikom. Just make sure you buy the 5000K light temp. Cheers and good luck

Hi Murray, from what you have described sound like your clock have a bad solder joint. Taking the clock off in a camry 2002-2006 is not hard at all, just youtube it. Once you have your clock out just resolder any joint you can see. Hope that help you.

Hi Andy, I don't recommend Supercheap or ebay HID kits as they are poorly design and won't last longer then six months. I would spend a little more and get a set that is made in Japan or the US or even Germany. There is a small company in the US that deal with after market head light conversion, they called therestrofitsource.com - they have some good products but can be a bit pricy. Hope it help you man. Good luck Cheers

Yep it sure is but the joy of having a flip key style is far more rewarding

Yes that is right both gps and aerial antennas are located on the back window. For the tint, any tinting shop would know which tint is suitable. I got tint on my camry azura with no problems

I think nulon is a good brand but i would rather buy the concentrate from toyota and mix it with distill water for best result

Hi Andy, how much do you want to spend on your new set of HID? Your 2008 model camry has already projector headlight so it perfect for an upgrade

Hi Son, yes you do need to cut your old key to retrieve the transponder and put it into the bew shell. Please also bear in mind that the shell i mentioned is not a direct fit for the camry 2003 model, i have cut and shaped it in order to fit original fob circuit board. It is not an easy job and requires lot of patience.

Here is the link to the flip key shell - http://www.ebay.com/itm/Empty-Remodel-Uncut-Flip-Folding-Remote-Key-Shell-Case-For-Toyota-4-Button-RAV4-/121099569392?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AToyota&hash=item1c3218c8f0&vxp=mtr The blade will fit toyota camry 2003.

Hi Son, thank you for taking an interest in my post. I'm sorry but i don't have an images for you, i forgot to took some when i was working on my flip key. However, i could send you a link to the item i bought on email if that help.

That don't look like power steering oil leak, looks more like engine oil. As martin said check for rocket gasket. cheers

Thanks guys

Hi guys, I want to buy a Kincrome socket set and I'm not sure which one to buy. There is the old model (spline) and the new Lok-On. Has any one used the Lok-on socket set before? Any help is appreciated. Cheers

Hi guys, Recently I have a check engine light in my camry 2003 v6. I when and got the code read, it turn out to be a failed knock sensor 2. I'm wondering does any one have a PDF copy of the repair/service manual for this particular car? I want to replace it myself and also replace the leaking gasket and spark plug too. Thanks.

Your engine is supper clean, man!

Hi, could get a hold of that pdf file? Im trying to replace my defective 2003 camry knock sensor and would the know all the torque spec. Thanks

www.toyotanation.com/.../363281-how-digital-clock-repair-2000-le.html Copy and paste this into google and you should find the right page.

Yep, idle control valve. If not fix simmental your car!

I guess the only hard part is the six star shape screws which you can try to open using a flat head. However, your clock might have an entire different problem and resoildering might not fix it. Be adventurous and have a go, it your car, you can break it. Good luck

Hey, The youtube video is for a corrola not for camry. It not too hard to do, just need to find a soldiering iron and lead. Just touch up resistor 12R0