Amit

Hey mate, I have since found the acc connection. I tapped in the "fuel gauge sensor" fuse in the fuse box. Sorry don't remember the fuse number but if you have a multimeter you can easily find it. This was the only fuse which comes live on acc and goes dead on turning the car off. I used the dual tap fuse which I bought from jaycar for $4. Works like a charm.

Thanks Trent, Yes the idea is the same. Ideally DRL should turn on with ignition and off/dim when Headlights are turned on. In the relay that came with DRL, there is a wire to tap on to headlight to make the DRL dim. I am however struggling to find a ACC or ignition power in the engine bay so that DRLs are turned on when key is turned to position 1/2.

Hello all, New member here. I am trying to install DRL on my 2011 Kluger. I have done most of the job however struggling to find a ACC connection in engine bay. On few online posts, it is suggested to T-Tap to high beam or park lights. However by doing so, DRl only comes on when I turn respective light on which is not preferred. They should come on when turning the Ignition on and go off when ignition is off. I have tried to connect to Ignition fuse and Dome light fuse but no luck - DRL stays on even after removing the key. Any help will be highly appreciated.

I am also trying to hook up a DRLl to my 2011 Kluger. I tried connecting ACC cable to park light and head light, however by doing so they only come on when park light or headlight is turned on. DRL should turn on when turning the ignition on and go off when ignition go off. Can anyone tell where can i find ACC connection in engine bay? i tried hooking to Ignition and Dome fuse however the light stays on even if the keys are removed.