Jump to content


Steelo

Regular Member
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Steelo

  1. Thanks Mate you are a lifesaver!
  2. OK! Have got carby so engine runs without foot on pedal all the time. Still running rough at idle. The screws in photo (not my carb) are #1 Idle mixture #2 Idle speed #3 Fast Idle Screw #4 A/C Throttle up screw - this never contacts anything to make an adjustment Can someone explain the sequence of adjustments needed to all these to get the carby running sweetly?
  3. Thanks for advice. Was laughing a while ago with my brother haven't touched a carby for years, used a timing light or adjusted points and now I own this mongrel!
  4. Have installed carb on the car it will start and run as long as I keep foot on pedal. Checked automatic choke setting - took cover off and it is lined up correctly. Get a rough idle without pedal depressed if idle speed screw wound right in. Mixture screw about 2 turns out. The fast idle screw doesn't touch the adjusting plate - no vacuum to the chamber that pulls base plate up to adjusting screw. The hose from vacuum adjuster goes to an electrical fitting on drivers side firewall - doesn't seem to be working.
  5. Is there a chance someone has a sticker on a 1995 22R Hilux that hasn't perished and cracked? If you could take a pic for me and put it up here I'd appreciate it.
  6. I've got water sounds sloshing in my door floor sill. Have removed end plugs behind cab and can feel about 3cm deep pond in there. Where do I find the drains to empty this?
  7. Can someone tell me what colour code for "Silver?" rims on single cab tray back ute? Am happy with a close generic paint colour.
×
×
  • Create New...

Forums


News


Membership