Jase89

Sorry mate for the late reply we Didn’t end doing anything, as had no reply so we left it as is and eventually got rid of the car all together.

Hi Guys, I got a 1998 bug eye Ae112r and planning to install a viper keyless entry kit model 211hv. What I know so far are the wires for, horn, dome lights, ignition and 12v constant. Wondering if you guys can shed some lights on where the lock and unlock wiring is for the doors? I saw a video on YouTube saying it’s on the passenger side kick panel but I’m in Australia and his car is left hand drive so his passenger side is out driver side and vice versa. Anyway I tried looking for the same wiring colours but had no luck. so wondering if you guys can point me on the right direction please? Also, for the dome light supervision on this kit would anyone know if I should wire it to the courtesy light switch that’s located near the fuse box? I’ve attached the instruction manual but seems confusing when reading it. Thanks in advance.

Hi, I need some help from the kluger gurus out there. I got kluger grande 2011 model which unfortunately got the non USB big screen very outdated audio unit. I am planning to put a double din on it. I have already bought a facia from wreckers and a second hand unit as shown on photos. I have taken some of the photos of the back of the kluger grande audio unit plugs at the back. Only plugs that connects are the usual power and speakers plug but the rest are different plugs. My question is which harness do I need to make the reverse camera and steering wheel control work? Any ideas would be very much appreciated. I am planning to upgrade it to have carplay, USB connect and just modernise the damn thing. Thanks for advance. Jason

Yea I did you need a patch harness from Toyota I forgot the part number sorry. But it ends with 360. It's like $21 Then should be just plug and play for the plugs. There's 2 wires on the 360 wiring that you will need to connect. One is for the reverse trigger which is the green one. You'll need to tap that on the passenger kick panel there a wire there that goes to the reverse lights, I think it was red with white stripe on the middle plug easiest to test is with a test light. Then connect the purple wire which is for the speed wire behind the cluster. Then just connect the reverse camera you'll need a reverse wire plug (4 pin) from ebay the red wire you can tap that to the accessories wire I think it was either red or grey, from the audio unit harness then plug it in your reverse camera wire up all the way at the back. I just bought a camera that mounts to the rear park lights so no drilling required. (photos attached) then that should be it.

G'day Hows everyone going? I've got a 2011 yaris ncp91 MANUAL. Just installed a pzq6000524 audio unit with some patch harnesses. Everything Works, but sometime in the near future preferably next month I would like to add a reverse camera to the unit. (Still not sure whether to get genuine or aftermarket ebay camera that's why) Photo provided of the audio unit. Question is which wire and what colour do I tap into for reverse trigger for reverse camera? Photos will be very much appreciated. I've asked our local unit installers but he said it might be pink, red with white stripe or yellow. Wire I'm looking to tap are the ones behind the glove box. Anyone can shed some light on this. Thanks very much