MrKots

Wanting some knowledge for EPB (Electronic Park Brake) removal and disassembly. I wanted to paint rear calipers and wanting to completely remove rear calipers for better paint results. Im aware of putting it on Neutral, put on acc then put park then turn off car completely to disengage EPB. However im not really confident on using this way. Anyone who have done EPB removal before im kindly asking for some advice and knowledge. Thanks! 

3 hours ago, TIDYWAZZA said:

 The PCD or stud pattern is 114.3. The 1.5 is the thread metric pitch. Offset / ET will be 45.

The tyre size you choose will be most important to having adequate clearance in the wheel well to avoid suspension & guard contact 

If you have an 2019 ASV70 Accent Sport your original wheels should be running.

215/55R17

7.5Jx17 ET45

5x114.3

M12 x 1.5

60.1

 The  2019 ASV Camry SL runs 

235/45ZR18

8Jx18 ET50

5x114.3

M12 x 1.5

60.1

You will notice the offset /ET changes to centre the wheel / tyre in the wheel well for clearance.

 

 

 

 

Do you think that 8.5Jx18 or 8Jx18 ET40 and ET42 will fit without any problems?

Hi. Im planning to buy wheel set for my 2019 Camry Sport but I'm not too sure if it will rub or not with stock suspension. Im buying, ENKEI TS10 18X8 +40 5-114.3 BLACK or SSR GTV02 18X8.5 +40 5-114.3 FLAT BLACK. They are the same offsets but different widths. Will these rims fit? Im not too familiar with cars so im really struggling. Also what is the stud pattern of camry? Is it 1.5 or 1.25? Thanks.