Jump to content

camrie

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Profile Information

  • Toyota Model
    Camry 2006

camrie's Achievements

Progessing

Progessing (3/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Hi Akuma, have you done your hid installation? I havent done mine. Last time I tried to find some pin that may hold the lights but it was unsuccessful. With d2s that you mention, does it plug and play without any modification to the housing nor to the pin that hold the light(if any)? Thanks
  2. Thanks for the info poohbear.. It seems quite complex, but I'll have a look at the EUro light & camry light over the weekend. What I've been thinking was to find/make a kind a pin holder(like the one normally used in H4) that can hold the H7 attached to the housing. Because when I tried to install last time, the light was perfectly fit to the housing but in can be lock sadly.. I'll let you guys know as well once i find out the way to do it.. Ok, No problem.. I'll let you know once done :) Actually its not too hard for the Gen6 as you only need to do minor modification to the housing, i've seen it done from a US site, here are some progress pics: And this is what you call real HID.. What you need: some kind of projectors : as shown above, these are TSX projectors (same ones as accord euro) - you can find one from honda wreckers as you can't use the american ones as they are LHD. You can use your existing HID kit ballast as long as you've got a AMP style D2S plug (ebay's a good place for that), bought a set for 18usd a while back. And then you'll need some D2S bulbs ...Ebay for cheap aftermarket ones, OR get the philips 85122+ or Osram xenarc, very reliable. (i'm using the philips one) OR you could buy a 2nd hand set of OEM ballasts/bulbs 200-300.. and you might want an extra pair of headlight - so you can work with it just in case you don't break your ONLY one....:)
  3. Ok, No problem.. I'll let you know once done :)
  4. not another HID in a halogen projector thread.. :( = glare but anyway, it should fit if you've purchased the correct bulb. Any pics? and if you really want to go ahead with the HID Kit, you need a wiring harness... Thanks for your reply.. Yes, I purchased the complete H7 kit based on what is originally fitted to the car & the manual book.
  5. Thanks for your reply & information, I don't thing I'd go for the first option. With d2s light, do I need to purchase the entire kit or I can just purchase the light bulb and connect to my existing HID kit? If so, is the kit available in auto shop like autobarn / ebay? Before I purchase the kit, I do some research which I found that in this camry model in US, it should be using H11, while in OZ version (according to manual) it should be using H7.
  6. Hi Everyone, Can anyone advice me how to install HID H7 to 2007 Camry. Currently I'm experiencing a problem plug in the light bulb to the housing :( Is this a common problem? Thank you..
×
×
  • Create New...

Forums


News


Membership