RoLLa 3

okay well my budget is less then $150 and i only want the one amp for 2 subs.... Thanks

hey i have 2 pioneer 10" subs and they are 250w rms each which would be 500w rms and they are 500w max each meaning 1000w and the are both 4ohm some people say buy a amp with less max like 800w so you don't blow them n some people say worry about the rms so what exactly am i look for???

can i have it???

got myself a sony cd player and it didnt come with these parts so just wanted to know where to get them or if any1 has spares Thanks

does it belong to any1 on this forum?

R.I.P STIVO

yeh so whats this about free rego =P

sorry to bring this up again but if the amp has a lower rms then the subs(100wRMS x2 = 200w) does it matter like will it under power the subs or will i have to find an amp with 100w rms per channel and about 500w max or sumthing?

which amps have the option for me to set the watts? coz all ive been finding is the max of the amp and the rms .. n you cant change that can you?

Hi i have an amp which is 2 channel 500w max 250w per channel max don't now the RMS becoz it hasn't arrived yet i want to hook up 4 speakers to it until i get sum subs but i don't know how.. i got the two front 4" speakers 2way they are 100w max per speaker 20w rms per speaker & it says 4 impedance on each speaker.. the 2 back speakers are 6.5" 4 way 250w max per speaker 150w rms per speaker Frequency: 45 - 20KHz Sensitivity: 90dB / W / M Magnet: 10 oz doesn't say about impedance how do i connect these four speakers to the 2 channels without over powering them ?

I found sum at a shop if any1 wants them dot know the price thou

yeh coz ma mum has the white one pretti much same as that pic there (the white one) n i was planing on getting one like the black one tx5 turbo but new laws no turbo ... n well i want a corolla sportivo but not as a first so i guese ma mums car is ma first jst gta make it look decent.. i sorta did it with paint took a while

kool thnx =]

it should look like this but with the rims, and the red line in the side skirt and rear bumper

ey just wondering if any1 is good at photo shop and can do me a favor coz the program paint is ****... i want to see how it looks in white and no spoiler... same rims but under the side & rear (not front) like where is says tx5 can u make it white,, leave the grey red grey n then the bit at the bottom white.. thanks

well its a shared car so i dont want them on all the time, mostly rnb or house music, not too loud i dnt wna go deaf just at a good sound

does this mean i get a 200w 2 channel amp ?

thanks that straightened some stuff out, the subs are boxed together, for the amp i might start looking 2channel would be cheaper ey? dno.. the amp would have an off switch yeh? coz i dnt want the subs on all the time... (shared car) also 4got to mention is there away of running the amp and subs off a seperate battery? and is bridging the amp from 4 to 2 channel bad for the amp or anything? does it make subs sound different?

also 4got to say is there a way of switching the subs on n off whenever i want ?

Okay people i have two 10" subs the specs of them: General TS-A2511 Short description 3-way TS-A Series Features TS-A2511 Frequency response 25 - 30.000 Hz Sensitivity (1W/1m) 93 dB Maximum Power 400 Watt Nominal input power 100 Watt Speaker Size 285,0 mm Woofer size (cm) 25 cm Woofer material IMPP Cone Woofer with Butyl Rubber Edge Midrange size (mm) 66,0 mm Midrange material cone mid-range with Ferrite magnet Tweeter size (mm) 18,0 mm weak i know but thats all i need for know.... i want to run both off the one amp, i have no idea how to though havnt got an amp yet, could some1 tell me what amp i should be looking for? 2 channel- 4 channel- monoblock- no idea is this the correct way to connect 2 subs to an amp: THANKS HEAPS p.s soz bought spelling

Hey ive just put a ford radio in my mum's car (91 Ford Telstar TX5 Ghia) and new back speakers with new wiring, new front speakers with old wiring, and i conected it all up, the earth wire on the radio is correct and so is the speakers all positive and negative, but the two 12v power wires I'm not sure if they are correct, I'm pretty sure they are coz the radio turns on when the car is on, anyway my problem is that on the radio and tape, when i put the volume up (just past half) the speakers make a distorted noise when the bass of the song goes, at first i though maybe the old wiring of the front speakers but the back speakers have new wiring and make that noise the speakers are Front - Pioneer 4 inch 180w Max 2 way Back - Boss 6.5 inch 250w Max 4 way the radio had 4 spots for the speakers 2 positive and 2 negative i joined the back together and the front together on the radio connection..... all speaker connections and radio conections are twisted together tightly and electric tape ontop.. PLEASE HELP

Well ive had runescape for like a week in grade 3 n got bored n im a lvl 2 lol n ma cousin wants a good lvl w/e that means so yer any1 remember their p/w ?

Im Getting My Learners in 3 Months Can't wait but also sorta nervous about the test ... anyone got any tips ? im in Melbourne by the way..

I Like The LooK!

http://au.toyotaownersclub.com/forums/inde...mp;#entry208673 found this.. does it help ?