To resynchronise the remote control: 1. Turn ignitiion switch to "ON" 2. Press door lock, unlock button on remote control 3. Turn ignition switch to "LOCK" and remove key 4. Test operation of remote control -Additional features: HORN CHIP When Horn chip is enabled, the vehicle horn will chirp on locking nand unlocking the vehicle, to enable horn chirp: 1. Turn headlight switch "OFF" 2. Cycle the ignition switch from "LOCK" to "ON" three times (within 5 seconds) leaving it "ON" 3. The vehicle security indicator will illuminate continuously for 5 seconds 4. Confirm that the cehicle security indicator has i;lluminated continuously and operate the horn within 5 seconds of the indicator illuminating. The turn signals will flash once to confirm successful programming. 5. Turn ignition switch to "LOCK" and test system with the remote controls. To disable horn chirp, repeat therocedure for enabling. TWO STAGE UNLOCK With two stage unlock enabled, the first activation of the remote control, unlocks the driver's door only. A second activation of the remote control then unlocks all the other doors unless the ignition switch has been operated or the doors are unlocked in which case the second activation of the remote control will relock all the doors. To enable two stage unlock: 1. Turn headlight switch to "OFF" 2. Cycle the ignition switch from "LOCK" to "ON" three times (within 5 seconds) leaving it "ON" 3. The vehicle security indicator will illuminate continuously for 5 seconds 4. Confirm that the vehicle security indicator has illuminated continuously and operate the power door lock switch to the unlock position within 5 seconds of the indicator illuminating. The turn signal llights will flash once to confirm succesful programming. 5. Turn ignition switch to "OFF" and test system with the remote control. To disable two stage unlock, repeat the procedure for enabling. okay ive got the answer my self thanks
