ELEGNT

yes it is a lag monster bushfire has not been fixed, motor is getting pulled out

Blue is current tune Red was run in tune power comes on really late and really hard, between 4000 and 5000 rpm I pick up 82kw atw LOL!! was expecting a little bit more but by the look of how it just hold constant power up top and doesn't keep climbing says that something is holding it back. may be cooler or turbo.

even with 4-8% leak down on the leak down test you would still say blow by? tuned by BPS it does exactly that when i engine brake, get on it again, big could of smoke

Don't be dodgy, just pull the head off and take it to get reco'd. Will be worth it. or 3k for port, polish, oversize valves, aftermarket springs and HKS cams. 3k is alot of coin to lay down though

its definatly oil man, my coolent temp enrich is high but its definatly oil. i did a compression test last night, compression was ok did a leak down test too only between 4-8% leak down which tells me its not glazed bores and not getting blow by. the spark plugs where nearly dripping of oil though and there was a pool of oil sitting ontop of the pistons its either valve stem seals or valve guides, id think? yeah its gotta be something in the head... like i said, your seals probably went hard from lack of oil for however long, and now they are shot. correct! dont want to do valve stem seals then find out the real problem is valve guides. but to do valve guides its a head off job Just pull the head off and do it all at once man so much effort cuuuuuuuuuuuunnnnnnttttttt. plus i wouldnt do it myself. thats one thing i havnt played with, thats heads. i like getting head though.....wait what

its definatly oil man, my coolent temp enrich is high but its definatly oil. i did a compression test last night, compression was ok did a leak down test too only between 4-8% leak down which tells me its not glazed bores and not getting blow by. the spark plugs where nearly dripping of oil though and there was a pool of oil sitting ontop of the pistons its either valve stem seals or valve guides, id think? yeah its gotta be something in the head... like i said, your seals probably went hard from lack of oil for however long, and now they are shot. correct! dont want to do valve stem seals then find out the real problem is valve guides. but to do valve guides its a head off job

its definatly oil man, my coolent temp enrich is high but its definatly oil. i did a compression test last night, compression was ok did a leak down test too only between 4-8% leak down which tells me its not glazed bores and not getting blow by. the spark plugs where nearly dripping of oil though and there was a pool of oil sitting ontop of the pistons its either valve stem seals or valve guides, id think?

ok last night i did a few things replaced pcv took off breather line to catch can - no oil took off catch can - no oil took off intake pipe before turbo - no oil took off intercooler pipe after turbo - no oil slightly more shaft play in turbo but not excessive ran the car with no breather line on and no filler cap - bit of air coming out of them but no more than to be expected and no smoke. it is looking promising that its not glazed bored and getting blow by tonight i will do a compression and leak down test on it

ash, it will be the tuner i will be kicking in the nuts trent. cheers man i am going to do that tonight. very much sounds like blow by to me. im getting a compression test and leak down test done tomorow, fingers crossed :(

from the sound of that and the youtube clips ive seen, its not turbo seals then. more so glazed bore than anything :( worse when cold because pistons havnt expanded yet, doesnt smoke after a thrash because piston are expanded, spitting out fuel out the exhaust because its hasnt been burnt in combustion because of blowby. FML if i have to rebuild this car again im going to commit suicide

sweet mate, cheers for that. how much smoke was coming out of yours though? my turbo still performs like it always has boosts hard and comes on at the same time

sure do man. may need to come over and do a compression test on it on the weekend mate, if thats cool I'll be up the sunny coast this w/e. you can come grab the tester off me during the week if you like what day do you leave, can i grab it after work friday then?

sure do man. may need to come over and do a compression test on it on the weekend mate, if thats cool

mick you have a compression tester?

its worse when cold but still smokes when at operating temp. especially on back off or change of gears. head is only 4 years old with 20k on it but wasnt started for 1.5 years. turbo has unknown kilometers on it, off a 99 model 22B sti. still holds 20psi of boost till redline, still spools up as quick and still flutters the same I would be doing the turbo seals first, since thats easier. there is no replacement parts for my turbo and because its ball bearing its not rebuildable :( fail

its worse when cold but still smokes when at operating temp. especially on back off or change of gears. head is only 4 years old with 20k on it but wasnt started for 1.5 years. turbo has unknown kilometers on it, off a 99 model 22B sti. still holds 20psi of boost till redline, still spools up as quick and still flutters the same

i beat dad by 2 car lengths from a rolling start by top of 3rd, so dont think thats going to happen man lol yes me too :(

Alright colt is having some issues at the moment motor has done 2500km since build problem im having is: when cold (all the way to running temp) it blows BULK amount of blue/grey smoke, just burbles out at idle and makes a bushfire when i rev it. before running temp also when i rev it slatters out what it looks like oil or fuel about a meter out of the exhaust all over the ground. when warm and im puttering around it blows blue/grey smoke constantly, alot on back off and alot on inital acceleration. But when i am into i hard it wont smoke at all, even when i pull up and just free rev it wont smoke, but slowly come back when i start putting around again. my conclusions are: Oil seals in turbo are shot - this explains most of it but smoke would come out more white i would think Valve stem seals are shot - this would also explain why its worse on start up/ back offs and gear changes. the head thats on it came off an engine that hadnt been started for 1.5 years. Glazed the bores/getting blowby - the engine had a soft run in due to ecu troubles and a very very rich run in due to tuner stuffing my tune up. buy why has it got progressively worse since the build and why has it got alot worse since my last service when i started putting fully sythetic in it apposed to mineral. i dont think many people will be able to answer this but im chucking it out to people like mickwheels, CHA54, silvabullit etc thanks fellas

this makes me miss my aurion and wonder why i never bagged it

may come

oh my!!!

so much want!!!!! such a nice car and insane power

car had its run in tune on the weekend. made 203hp (151kw) at the wheels Didnt put much boost or timing into it but it goes really well. happy with it, just have to do another 600km and ill go for my full tune, he wants to use the the knock monitor with headphones when i go back for more boost because we cant hear anything over the screamer pipe lol trying not to drive it much or put my coilovers in as Ive only got 8 more weeks of good behavior before i get my points back lol

pics are so mint mate!!!!!!