Search the Community
Showing results for tags '2zr'.
Found 1 result
Bought a Toyota Corolla ZRE152 in Feb 2010 MY09. Engine is 1.8 2ZR-FE Photos 91.7KW, stock is around 70kw Peak torque is around 227nm at 4400rpm (37% increase in torque) With camshaft change, aiming to get 107kw at the wheel with more aggressive camshaft, it will shift the peak power band to 7000rpm, with some sacrifice on mid range I am aware the dyno is just a rough estimation of engine output, and is not accruate Stock with cat back only (Graph referenced from another member dutchie101) Before and after Unichip, plus headers, full exhaust (include high flow cat), NST pulley, intake, pay attention to midrange After LSD and flywheel and new pod filter (replacement, same brand and model), nst pulley removed. The 2 dyno lines represent two runs. First run is 89.7kw CurrentMods Power related - Injen CAI (3-5kw increase) - WeaponsR Header (2-4kw increase) - Custom 2 inch Catback installed. (3-5kw increase) - NST Pulley, around 2kw increase, broke into three pieces after 50000km - CatCo Hi Flow Catalytic Converter, with headers sitting so close to it, it becomes a bottleneck. (1-3kw increase) - Unichip (7kw in mid range, 3kw at peak) - MWR flywheel (6kw increase across the range) Handling Related - Bridgetone MY02, Toyo R888 for Track use - Remsa Brake Pad or A1RM - DBA standard rotors - Peddars xtreme Coilover. 30 ways of Adjustment - Cusco Front Struct brace to reduce body flex in tracking - Cusco underbody brace - KMAC 20mm Rear Sway bar adjustable - Wiechers rear strut brace - Peddars lower arm polyurethane bush - Quaife LSD Exterior: - HID 6000K - Front fog light - Toytoa Europe side skirt - Levin style spoiler - Rear tow hook - Auris badge Engine oil: Nulon 0w-40 High Performance Synthetic oil Reducing Weight Remove all seats except driver seat (around 30kg) Remove spare tyre and tools (around 15kg) Light weight driver seat (5 kg reduction) Lithum Battery, 2.9kg each, https://www.lithiumax.com.au/product-page/lithiumax-new-450cca-black-lcd-series-battery Light weight flywheel (5kg reduction) - Rota R Spec 16x7 (6.5kg each) Work in Progress Unichip i-driver to increase rpm to 7200rpm, our car is cut by fuel when overrev MWR Camshaft stage 1, https://www.monkeywrenchracing.com/product/mwr-cam-set-2-2zr-fe-stage-1/. This will increase the peak power by 8% estimated Below was done in 2012, where no flywheel, no LSD and no camshaft mod