Kluger Interior Lamp removal?

[Frysie]

Does anyone know how to take out the front interior lamp assembly and change the lamps in a Kluger 2010 model?

Just wanting to change to LED's and need to replace the 2 wedge bulbs.

Any help here would be great.

Cheers

[nealo]

The push button ones?

I've changed mine to LED but can't remember how?

I think a thin small screwdriver on the side closet to a door and pop it down. (I think).

I'll get back to you if I work it out.

[Frysie]

Yer the push button ones.

That would be great if you could.

Thanks

[nealo]

I just tried it and the easiest way was it pop out the middle clear bit (the bit between the push buttons)with a small screwdriver and then you can put your finger behind the push button ones and pop them out.

[Frysie]

Thanks, I will give it a go.

Thanks for that.

[Frysie]

Yep works a treat, can not thank you enough.

Cheers

[Coover]

I've gotten the front coutesy/map light covers off, and replaced with blue LEDs. Isn't that a funky little light that shines down on the centre console..."mood lighting", or a mini moonbeam!

What I can't figure out is how to access the bulbs over the middle row and the ones in the cargo area. Don't want to just take to it with my plastic screwdriver in case I do it at the wrong angle and break the lens cover. Can any learned forum member offer advice?

Graci !!