ABS Brake Light Stays On! (Need help!)

[ParvezK]

Hey everyone, I had my clutch changed to an exedy clutch yesterday.

In order for the mechanic to take out the gearbox to get to the clutch, he had to take out everything in between which meant disconnecting the ABS sensors & taking out the shafts.

After replacing the clutch, he reconnected everything & it's working fine, although, the ABS Light in my cluster is on.

He disconnected the sensor, cleaned it with the air compressor hose on the brakes & the wire. Also, he used a cleaning spray on the sensor. Reconnected it but the light is still coming on.

The ABS is working fine though, he tested it out & it's working well but it's annoying seeing the ABS light on in the cluster!

We've disconnected the battery for about 10 minutes & reconnected it so the computer can reset but still it's staying on in the cluster!

Can anyone recommended how to fix this?

- The sensor connection has been cleaned.

- Computer has been reset.

- ABS works well.

Maybe a bypass or something like that?

Any help will be appreciated!

Thanks boys! :)