Jump to content

vvti16v

Regular Member
  • Posts

    295
  • Joined

  • Last visited

Posts posted by vvti16v

  1. Out of curiosity, what set-up did you have when this was on your car? Were you using the higher boost pulley?

    I was running low boost with 2.4in and depend on where you go for the dyno is between 106-110ATW

    Did you get a dyno reading for the set up? Besides the higher rated injectors, any other mods to the fuel delivery (ie rails or better pump?)

    upgraded the fuel pump to be safe, otherwise the same

    What kind of intake did you have on the charger?

    The kit comes with a custom intake

    Any changed to the bonnet clearence or did you have to get a ghey bonnet scoop or something?

    stock bonnet no mods

  2. Most people would know that my car is going back to stock and in the process of installing original parts back the rear swaybar was removed and it was broken at the welded joint....I have been getting a clunk noise when the car twist (going up driveways) and i though it was a loose bolt on the swaybar but it was a broken swaybar. So if people have the same noise you should check it.

  3. TRD Supercahger Package for 1ZZ: $3200 $2800.00 posted

    TRD SuperCharger with custom intake with 2.4in stock pulley(7psi)

    UDR 2.1in pulley (11psi)

    Sard 530cc injectors

    Toyota metal intake gasket (new)

    Power FC ECU with commander

    Custom air intake kit

    Custom battery relocation bracket for the air intake

    Still for sale......

    post-1353-1268958406_thumb.jpg

  4. if you're going to put anything in it, put in a walbro. It's really the only upgrade pump that will fit anyway. I can't remember if we upgraded the pump in pippy's car when it was supercharged, from memory we didn't.

    I got the fuel pump upgraded using a Walbro, for around $200 I think is worth it.

  5. Any ideas ? :huh: it look slike rain today , so im getting more concerned as the week goes on. :unsure:

    Don't these thing have some kind of manual wind down function if i was to remove the switchgear and head lining slightly ?

    I have problems with my 2002 moon roof too.....is fu$%en leaking..........

  6. hey guys so ive finally given my 1zz with a pcf a good run and when the revs get up with a quick gear change manily 2 to 3 the engine light flickers on and off for a bit then goes away. could it be a dirty maf ?? or is it something more serious. redline has been set to 6700 could this also be why ??

    cheers in advance

    moving the redline should not cause this, my redline is set to 7200 and had not issue with the CEL....and this is with PFC on on 1ZZ.

  7. hi Guys,

    looking at the UR web site they sell Torsion bar which I alway call this swaybar and they also sell a rear sway bar, which is the correct term???.......i have a whiteline rear swaybar atm and would it help to also add a SWAY BAR (19MM) Code:UR-AR19-076???

    thanks.

    ZZE - REAR TORSION BAR (2 POINT) Code:UR-RT2-578

    2lift07.jpg

    ZZE - REAR SWAY BAR (19MM) Code:UR-AR19-076

    28018o1.jpg

×
×
  • Create New...

Forums


News


Membership