Swanga

Kings only do one height, plus the front actually sits lower when you look at the sill. I went conservative on everything and it came out better than i expected, i actually thought the 18's would look to small and it wouldnt be low enough, but for a company car it sits perfect.

Thanks for all your help

Here it is all done lowered on Kings.

Let me know what you want for the Thai grille?

Yeah i'll try and go as low as possible now......

Thanks for all your help...

If i was to go with an 18x8 what tyr would be the best, 245/40 ??

I am running 18x8 with 245/40 tyres, i would recommend you do so too =)

The wheel place has reccomended 235/45....??? This gives me the standard diameter of my standard tyres, so i guess it cant be bad.

Thanks for all your help...

If i was to go with an 18x8 what tyr would be the best, 245/40 ??

The +45 offset wheels are the ones you want. +35 will stick out of the guards at the front and scrub!

+1 on the above, the offset ya need is +45... :)

How wide are your 20's 8 or 8.5???

I know my wheels are 16 inch and the tyres are 215/60........

Yeah its an ATX.

I saw your thread and your car looks great. I cant afford to have any rubbing being a work car hence why im asking a few questions. I might consider 18's if its going to be to close to call......

Hi guys i recently got an Aurion as a company car and im looking at putting a set of 19x8.5 wheels on it. I've done a bit of research around the site and it seems +45 is the standard offset. I am looking at the two different wheels below they are almost identical but one has a +35 offset and the other +45. I intend to lower it a little as well so im which ones do you think would be my best option? Based of other posts i should also go for a 245/35 tyre??

http://www.talebtyres.com.au/products_clos...amp;part_no=665

http://www.talebtyres.com.au/products_clos...amp;part_no=552

Any help is greatly appreciated as i have modified Fords all my life so the Aurion is new to me.