Nzpezza

I have a 95 lux with a v6 3.8 convertion and had the water issue i just cover dizzy and injectors and crank angle senser in wd40 keep most water off and help despers it to if you need to get water out. have you got inner wheel plastic?? if not make some up with rubber as my 33" use to throw up alot of water and mud and sand till i made some up. And under plates help too.

Thanks mate, who made up your under plates and what did you use? Sheet metal? Steel plates? Ali will be too soft aye? I assume they are screwed on so you can still get to the engine if you need too?

Thank you!

Hi, I've got a 83 RN46 Petrol Hilux that I've just done a complete engine rebuild in - goes mint!

But.....I took it off road yesterday for the first time in a little water and it didn't go to well. It sits pretty high on 33" mud tyres but still could have done better. I need some waterproofing help for the dizzy and coil pack please?? Can you buy waterproof distributors?? Am going to put a sort of splash/skid plate on the bottom of it to keep some of the water out.

Also, I've come to the conclusion I don't have a very good rear diff - does anyone know of a LSD or other diff that would go straight in please??

Who would be best to talk to about this?

Thanks heaps!!

Hi all, just looking for a bit of inside knowledge please :)

I've got a 83 Hilux with a 2L Petrol engine (think it's an RN46) with a 4spd gearbox and its pretty much blown a piston.

Just want to know if there is any other engines that will bolt straight in with the gearbox and the same ratio's etc. I don't mind if I have to change the gear box too but does that mean all the running gear will have to be changed to as it's for a 4spd?

Is diesel an option? I wouldn't mind the exact same engine but what's the chance of finding one that old in good condition?

Last question - anyone got anything that will go straight in that's just lying around? :)

Thanks heaps for your help!

:)