Jump to content

bluestivo

Regular Member
  • Posts

    17
  • Joined

  • Last visited

Posts posted by bluestivo

  1. Hey guys, so im currently trying to adjust my clutch pedal to see if i can get the clutch to engage any further..... i.e enable me to change from 1st to 2nd gear easily. So my mate has just got his done and is loving life ;) Anyways can anyone tell me if there is some secret to loosening the 12mm locking nut on the guide rod that goes into the slave cylinder.... i can get a spanner on there but i have no movement :/ its driving me crazy haha. Any handy tips would be appreciated.

    Cheers

  2. Hey guys,

    I'm putting the rolla on the dyno today, just wandering if anyone could give me a rough indication of how many kwatw i should be making?? Therefore i will be able to tell if the car is down on power. I have an injen CAI and a 2.5' stainless mandrel bent exhaust system with high flow cat..I'm thinking 110-120kw?? Any opinions would be greatly appreciated.

    Cheers Luke.

  3. The only vacuum pipe that needs to be blocked is the small nipple above the throttle body. It will be obstructed by two larger hoses. Not sure what you have doen with the charcol canister, but it doesn't need to be touched.

    87mph isn't down by much, most would be seeing 91-93mph. Try an ECU reset as it can develop strange fuel trims over time. Also put it on a dyno and see what the curve looks like. Don't forget to check the spark plugs, compression, et cetera. Post a pic/scan of your time slip too.

    Ok thanks mate. To reset ECU do i just unplu battery terminals overnight??

  4. I understand weight reduction and driver talent play an important role but what im trying to say is that my car is down on power. You can easily tell this by the mph reading at the strip. So what im trying to say is... the power problems im having is that to do with my intake i.e the charcoal canister (refer to pic) or is my problem elsewhere.. thankyou

    Ive just checked out the thread on drag times and guys running a 2.5 second 60ft which isnt that quick are still running alot higher mph and alomst a second and a half quicker than what i can run. Even with a faster 60ft i still cant compare to any of the sportivos... even stock ones. Cleary it isnt driver related... something is wrong with my car. I NEED HELP PLZ GUYS!!!!

    Also, could gearbox oil which is too thick slow my car down???

    Cheers

  5. Hey guys. I just had a quick search and can't find anything to help me out with my problem. So i took the corolla down the strip last night... the best time i could run was a 16.3 at 87mph... :( I have seen a few guys with intakes alone run high to mid 14 second passes. My car has the injen CAI and a 2.5' stainless mandrel bent cat back exhaust with high flow cat. So i was expecting to run atleast something towards a low 15 second pass. Obviously my car is down on power and im trying to work out why. The only thing i can think of is... with the injen CAI i was told to block off the hoses coming from what i think to be the charcoal canister (refer to photo). Is this correct??

    Any help and opinions would be greatly appreciated, cheers guys

    Ok guys so ive just checked out the thread on drag times and guys running a 2.5 second 60ft which isnt that quick are still running alot higher mph and alomst a second and a half quicker than what i can run. Even with a faster 60ft i still cant compare to any of the sportivos... even stock ones. Cleary it isnt driver related... something is wrong with my car. I NEED HELP PLZ GUYS!!!!

    post-25925-0-59431700-1326332214_thumb.j

×
×
  • Create New...

Forums


News


Membership