JQRambo

I got a $50 kit from ebay, took me about 10 minutes to install with ballasts mounted and all =) 2 years later, same kit and same bulbs are still going strong =) That being said, I used 2 other h11 globes and cut the connectors from them to solder the HID pins onto. It's a much better connection and i don't just have 2 pins/prongs jammed into the female connector like BADZR6's image shows.

Could be anything mate.

Running rough could be caused by....spark plugs, leads, ignition transformer, build up of carbon in exhaust/throttle body, injectors, crappy fuel, oxygen sensors....the list goes on. For something like this though, I would definitely take it to a dealer.

A dealership is the best place for a diagnosis. If the engine light was flashing, there may be a stored fault that the technician will be able to read.

(I work in a dealership and always like external mechanic diagnosis. They get the 'problem fixed' at an outside garage and bring it to us when the issue re-occurs)

Hmmm they are easy enough to get out now that I've done some myself. Looks like plents of things can break in there too xD

But if you have a rattle, you can always try some felt tap....given that it isnt a loose/broken bit of plastic in the vent or anything

Ok I read your reply and I removed the bottom most trim under the steering wheel and then the smaller trim below the ac vent on the right hand side. I just sort of pulled it after that and it came out easy enough =) Thanks for the reply!

Hi

I'm new here but have been reading various topics and threads by other users for years. My question is...how do I remove this AC Vent (Drivers Front). I have searched but had no luck. If anyone could help me before I attempt it and break something, it would be much appreciated.

Thanks!

I have a 2011 (MY2010) Aurion Touring model with a genuine sportivo lip kit =)