lacham05

You could do what i'm doing and use a 3.58:1 diff out of a KUN26 (2005 or newer 4wd 5speed manual) rear diff centre. Will completley bolt up and come with and LSD. Only thing is you have to buy a drive shaft also (from a KUN16 2005 or newer 2wd) and make up a new shaft from your old one and the new one as the flanges are different. I have the same conversion in my LN56 hilux and it worked a treat. My diff code is a G292

Hi guys

I've got my hand on a KUN26 rear 3.58 LSD diff. Im putting it in my hilux with a g series diff but have a bit of a problem

The bolt patterns are different on the flanges G-series 60mm square, KUN26 one is 65mm square.

And i cant swap out the yokes either as the bearings are different sizes.

Basically does anyone know if the flanges on the diff head itself are interchangeable??

Don't really want to have to chop up the two drive shafts at this point

So just to confirm can someone out there confirm that a Diff head from a KUN26 hilux fit into a G series diff??

sweet thanks mate

Does anyone know if you can put a diff head from a 2005 or newer hilux into a G series diff housing without much hassle??

I have a 1985 Lux with a V6 conversion and I want to bring the revs down at 100kph as its revving it's nuts off at the moment at 100.

My diff code is G282 4.3:1 ratio non lsd