avneet

Nicely played. Lol

Thanks alot. Wouldnt have got it going without your help.

Ok thanks. Thats the next mission. And by the way the reverse signal wire was not the purple one. It was the red one on pin 5. I guess the purple one must have been for the sat nav speed sensor.

Thanks a lot mate. Everything is going now. But just realized that if i use hands free to call than person on other end cant hear me. My old unit had builtin mic. Maybe this unit doesn't?

I will try doing it tonight. Hope it works. Do i need to connect the sat nav speed sensor wire aswell for my gps to work?

Oh ok. **** i put everything back together. I shall try again tomorrow. Maybe third time lucky. Lol

Where would i find this wire from?

Guys, i tried taking the 4 wires out of the 20 pin connector which were for the camera. I believe it was pins 11, 12, 13 & 14. And wired into pins 21, 22, 23 & 24 with spade connectors as per the instructions but still no go. All out steering control and display works but reversing camera is still a no go.

Sounds like a plan

With all this information, i could give it a go myself. I am a technician but for security and access control system. So im not too bad with wiring and stuff. But what i need to know is that since my car doesnt even have the 24 pin male plug, where do i get this plug from?

Thanks guys

Thanks so much. I think its a bit out of my league so i will take it to a auto electrician i think along with the images tou provided. Thanks heaps

Hi guys, i have a 2010 aurion sportivo with the 5 inch screen on the head unit for reversing camera and other radio controls. I have managed to get a aurion 2007 grande head unit which come with gps, reversing camera and a bigger 7 inch screen. Problem is after swapping the units, the reversing camera doesnt work now with the aurion grande head unit. The reversing camera is the original one which worked fine with the 5 inch screen head unit. What needs to be done to make it work with the aurion grande head unit?