Matty_SA

hey there,

I have purchased a head unit which has a reversing camera as a part of it and wanted to see if anyone else has connected up the camera and how they ran their camera lead etc to the head unit and also how they attached their camera and where?

here is the head unit

https://www.ebay.com.au/itm/192388080566

Attached are the pics of the camera

Any help would be greatly appreciated

Thanks in advance

On 10/30/2019 at 8:11 AM, Squalled said:

At this stage, the Corolla didn't have seat or curtain air bags in place. Depending on what was optioned, you will either have simply the steering wheel and/or passenger side air bag.

The newer chassis began to have a lot more air bags.

legend, thanks mate for that yes  ended up ringing a dealer to confirm so thank you for posting here as well, greatly appreciated!

Thanks Hiro I did buy those ones and in Aluminum thank you for your help 🙂

I hope this isn't a silly question but how many airbags in the Corolla Ascent Sedan 2006 that i have?

I am looking to get a couple of sheepskin front seat covers and they say they are:

Not suitable for vehicles with side integrated airbags within seat.

Does this Car have side airbags in seats?

Thanks in advance

Ok I got it, it wasn't that hard actually thanks again mate, really appreciate your help cheers

I just got it sorted thanks !!

I just managed to do it with the shift boot thank you.

Just to double confirm with the stereo I am getting in the vents themselves to pull the plastic out around the stereo as pictured with the red arrows I just did?

Do i pull it out that way??

Ok I have a 2006 Corolla Sedan and I am wanting to replace the Gear Shifter Cover and Knob, see pic for my current one installed, does anyone have any Ideas on how to remove the current one seen in pic, I have seen some others on youtube but not the 2006.

Any help would be greatly appreciated

Thanks in advance

Cheers

Ok perfect thank you I will simply go the vents either side of the current unit, I assume they just snap in or something, either way ill give it a go and yes I got the ISO for the new unit already, thanks again bro very much!

P.S. Dont suppose you know how to remove the gear shift boot cover, as I am replacing that and the gear knob!

2 hours ago, Squalled said:

I've not run spigots on my car, although my offset isn't as low at the wheels you've noted.

I've seen plenty of guys run quite low offsets, one of which is running 15x8 +0 on his Corolla and I don't believe he's ever used spigots.

Ok good to know thanks again bro, greatly appreciate for your help!

Hi all,

Literally second post here, I am wanting to upgrade my 2006 Corolla's wheels to some nice rims, but I need some technical advice about the new rims and the spigots etc.  The details of the car I have are these:

195/60R15 88V     6Jx15 ET45     4x100

______________________________________________________

The Rims i'm looking at have the following specs:

_______________________________________________________

I have been advised that my 6 inch tyres will be fine on the 7inch rims, but I understand I need spigots for the offset.

I am blaze' about rims at this point, is someone able to point me to a set of spigots that will fit these rims so they will fit my car?

Any help would be greatly appreciated and thank you in advance.

Cheers

Hi all,

I literally bought a TOYOTA COROLLA ZZE122R ZZE122 2006 4 Door Sedan 1.8 litre today.

So I am wanting to put a double DIN Head unit in it, something like this here: Click to item

And here attached is the unit in my car.

I have been unsuccessful in finding a similar how to video to remove the current unit, is there one here if anyone knows of one?

P.S.  Apart from the leads to attach the new unit in the back is any additional facia or anything else required apart from the new head unit. from what I can see its a swap over.

Many thanks for any help here in advance.