Hey guys, i have put some sound deadening in my wheel wells, and while i was at it i thought i would change my parking globes to some white LED lights. People say to take the bumper off, but here is a easier solution.
Step1: Jack the car up and take off the wheel.
Step2: undo all the screws and clips that holds the plastic under the wheel well and fender.
Step3: Remove the plastic completely.
Step4: Now up in the top right hand corner you will see the back of the parking light. Twist it anitclock wise and remove it from its place.
Step5: pull out your old globe and replace it.
Step6: put everything back in reverse order.
SIMPLE AS THAT !!
if you want to short cut a little, dont take the wheel off, but it will be a bit cramped, taking the wheel off will give you lots of room and make this project easier.
This all seems like too much work for something so simple.
Wouldn't it be easier just to unscrew and pull out the headlight, change it push it back in place. It's all one piece.
Well that's how I changed mine.
Just be careful when putting it back not to damage the corner of your guard.
Instructions on how to replace parking lights.
in Aurion / TRD Aurion Club
Posted
This all seems like too much work for something so simple.
Wouldn't it be easier just to unscrew and pull out the headlight, change it push it back in place. It's all one piece.
Well that's how I changed mine.
Just be careful when putting it back not to damage the corner of your guard.