Jump to content

tomee

Regular Member
  • Posts

    86
  • Joined

  • Last visited

Posts posted by tomee

  1. hmm so the whole thing is only 2.5" according to your measurement compared to 3.8" / 96mm on the amazon one

    are you able to take a pic?

    did some research on the tool number and it is 64mm so i suspect amazons measurements are wrong.

    i purchased the part from amazon and hoping it fits.

    does anyone know what oil Toyota uses on the rav4?

  2. i got a timing belt kit which included belt, tensioners, cam gaskets, drive shaft gasket aswell as new waterpump for $310 trade price

    then paid a mate of mine to do install it for $250 just to give you an idea

    i did the valve covers myself. i think the cost for gasket and bolt gaskets was like $50 each side

    the front one is ***** easy to do. the rear one requires some time and patience as you have to remove the intake plenum and wiggle the cover around to get it to lift off.

  3. ok i got the codes

    and i get 5 blinks then 1 sec pause then another 5 blinks....

    then it starts again

    would that mean its pulling 2 x 5 codes? or a code of 55?

    where can i check these codes to find out what it is?

  4. thanks rolla boy

    finally got the cover off and manged to change the gasket

    i tightened the cover in a cross pattern and checked all were pretty snug.

    after i put the plenum back on i noticed the back part of teh cover looked like the bolts got tightened more than the front 4, how much of an effect will this have with leaks again?

    they bolts werent tighted very much.

  5. Undo the injector clips, be careful as they're easy to snap...

    Remove the two 10mm bolts holding the injector wiring onto the rocker cover...

    Remove the two 10mm bolts at the back holding the wiring loom onto the rear of the rocker cover...

    Should have enough room to squeeze it out...

    Also, when refitting, be very careful not to damage the seal by scraping it on the cam gear as it's very easy to do and happened in my workshop once before...

    ive undone all those

    the thing that is stopping me is the plastic conduit that holds the loom. its stopping me taking the cam cover off.

    ive tried moving the loom and pipes behind it but no luck

  6. im trying to do the rear bank rocker cover gasket and ive got everything out, except the damn cover!

    the plastic conduit that holds the wiring loom is stopping me from taking the cover off!!!

    grrr

    ive tried stretching the loom and moving the metal pipe behind it, but theres not enough of a gap

    IMG_0820.jpg

    IMG_0821.jpg

    anyone thats done this before, any tips?

  7. whats the fuel tank size on the zze122?

    i havnt got my manual here so i cant check.

    got 630km out of a tank with 95ron when light came on.

    wondering as my fiancee's n16 pulsar easily gets 700km before her fuel light comes on. i believe she has a 60L tank though

×
×
  • Create New...

Forums


News


Membership