Jump to content


Mick2222

Regular Member
  • Posts

    15
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by Mick2222

  1. 10 hours ago, campbeam said:

    You will need to do some measurements of the ground clearance and the distance of your wheel to the bumper. Then input your figures into this calculator.

    https://www.calculator.net/right-triangle-calculator.html?av=6&alphav=&alphaunit=d&bv=28&betav=&betaunit=d&cv=&hv=&areav=&perimeterv=&x=75&y=17 

     

    Thanks Campbeam, that will work a treat.

    That is sooo simple...

     

    Mick

  2.  

    9 hours ago, Hiro said:

    I'd say more likely the OP is asking about approach/departure angles in the ground clearance sense (ie how steep a ramp can you hit before bottoming out)

    That’s correct, Hiro.

    The centre of the front bumper strikes our street, when driving (very slowly) down the ramp, out of our house.

    I need to know the angles for comparison purposes, when buying a new car.

    Mick

  3. Hi Warren,
    This is how I keep on top of my situation:

     

    WINDSCREEN WASHER FLUID
    I mix my own windscreen washer fluid, with:
    •    Water.
    •    Bar’s Bugs (windscreen cleaner).
    •    Morning Fresh (dish-washing liquid).
    I mix it in 5-litre batches, for Quality Control.

     

    FILLING WAS SLOW
    Filling my windscreen washer reservoir used to be slow, because of heavy foaming.

     

    SO I MODIFIED MY RESERVOIR
    I have permanently pushed some PVC tubing (thin-walled, 16-mm ID), all the way to the bottom my reservoir.
    Consequently, I had to discard my filler cap’s sight-tube (no problems).

     

    FILLING IS NOW FAST
    I now fill my reservoir through the PVC tube, with a funnel.
    This “Fill From The Bottom” method is extremely fast, as it eliminates foaming.

     

    DE-WAXING (October 2018 update)
    When necessary, I now remove wax deposits from the outside of my windscreen, with "Diggers" Wax & Grease Remover.
    I have used Mineral Turpentine and White Spirits, but this product is better.

     

    POLISHING
    I polish the outside of my windscreen, with "Sonax" Glass Polish.


    Method:
    •    Wet my windscreen.
    •    Allow excess water to drain away (too wet, is not good).
    •    Apply glass polish to a damp applicator pad.
    •    Polish my windscreen (with the same pad).
    •    Wash the polish from the windscreen (assisted, by rubbing the entire windscreen with a face flannel).
    •    Stand back, and wet my windscreen again.
    •    Watch for areas that dry immediately (they need further polishing).
    I never wash my applicator pad; I simply stow it in a clean container, ready for next time (saves on polish).

     

    INSIDE MY CAR
    I clean the inside of my windscreen, with:
    •    Rubbing Alcohol.
    •    Face Flannels (2).


    Method:
    •    Work in the shade (on cold glass).
    •    Rub a small area of glass, with an alcohol-soaked face flannel.
    •    Polish that wet area dry, with the second flannel (this prevents dried water marks from staining the glass).
    •    Repeat, on the rest of the glass.


    My cleaning products, are shown below.

    Cheers,
    mick2222

    1.JPG

    2.JPG

    3c.jpg

    4.jpg

    1388126712_WaxGreaseRemover.thumb.jpg.6732197ac9a04d0d083d390195611205.jpg

    430975468_DiggersWaxGreaseRemover.thumb.jpg.e97634ee63b7a9505d5a09a2a1f191e8.jpg

    6.jpg

    7.jpg

    8.jpg Applicator Pads (Supercheap Auto, "163187")

    9.jpg Face Flannels

    • Like 2
  4. I have replaced Toyota’s TNS410 Sat Nav (in my 2010 Corolla Ultima) with the Alpine 8-inch unit.

    Alpine's generic bezel was merged with the Corolla's fascia (it now looks like a Toyota OEM installation).

    All the steering wheel controls are still in use.

    But, the USB port (near the cigarette lighter) has been disconnected (the installer said that tapping into the wiring loom, was difficult and risky).

    So he routed a USB/3.5mm stereo input lead into the glove box (which works well for me).

    The reversing camera is now connected to the Alpine.

    And this is a vast improvement, as the reversing picture is now huge (and the internal mirror no longer has its half blind-spot, when reversing).

    Alpine's maps are supplied by HERE (from the same stable, as NAVTEQ, iGO and Nokia).

    The Alpine's maps are update-able online, via a computer program called "Naviextras Toolbox" (HERE's equivalent, of TomTom HOME) https://www.naviextras.com/shop/portal/p2howto-guide?guide=Toolbox

    And HERE invites its users to report map errors to its website, "HERE Map Creator" for remedial action
    https://mapcreator.here.com/mapcreator/-27.5,152.9,12,0,0 

    An SD card ferries all data between the computer and the Alpine (the computer must have an SD card drive).

    Hidden progress bars (when updating the Alpine) can be made visible by tapping the MAP Button.png (Map) button.

    The SD card is never in the Alpine when the car is driven (which is convenient, for update-checking).

    An upholsterer made this simple sun visor for me.

    mick2222

    1.JPG

    2.JPG

    3.JPG

    4.JPG

     

     

     

    • Like 1
  5. Maybe try super cheap as they more often than not sell most common harnesses that you would need

    Thanks for that, I didn't think of them.

    In the meantime, http://www.digoptions.com/ is looking into it; I told them that I also want the reversing camera image routed away from the internal mirror to the Sony/TomTom.

    Mick

    I received a reply from http://www.digoptions.com/ and they sent me to http://www.ebay.com.au/itm/FULL-KIT-Toyota-Fascia-Facia-Side-Trims-Stereo-Fitting-Harness-Wiring-Mount-/130756805910?pt=AU_Car_Parts_Accessories&hash=item1e71b68516 where I bought the kit that I need.

    Mick.

  6. From new, my Corolla was plagued by tacky bonnet rubbers.


    These rubbers were highly dangerous, as they prevented the bonnet from fully “popping-up” when the bonnet-release was activated (thus retaining the appearance of a fully locked-down bonnet).


    I finally overcame the problem by lubricating the rubbers with CRC “Dry Glide” (after 3 years’ of useless remedies – talcum powder, WD-40, cooking sprays/oils, etc.).


    The product is best applied by rubbing a product-moistened cloth along the rubbers…


    Cheers,

    Mick


    The Product

    CRC ‘Dry Glide”

    Part Number: 3040

    Barcode Number: 9310832030405

  7. Solved - Thank you for your assistance.

    Mick

    ===================================

    I have a 2010 2-litre Corolla Ultima.

    Can I upgrade the fuel from 91 RON to 95 RON?

    Do I have to change anything?

    Price aside, are there any advantages/disadvantages in upgrading from 91 to 95 RON fuel?

    Mick.

  8. Hi,

    Each time I insert a USB music stick (MP3 files) into my TomTom Toyota/Eclipse FollowMe device, I have to manually select "Shuffle Music" as this is my preferred setting.

    How can I make "Shuffle Music" the default setting?

    I don't mind getting "inside the device" to tweak files, if I have to...

    Cheers,

    Mick2222

×
×
  • Create New...

Forums


News


Membership