Freestyla

I think I will replace the ACC Ecu fuse regardless of how it looks tomorrow

This is with IGN Switched on

So I unplugged the battery for 1 hour (forgot about Toyota link who called me a minute after I disconnecte it) but that made no difference. I tested for power at the mirror switch, I assume there should be power there to the three wires but all I got was like 0.5 volts which is nothing obviously. I am led to the conclusion that there should be a blown fuse which I will be checking again hopefully tomorrow (the ACC ECU fuse). I don't know what to do if I can't find the blown fuse.

Will try all those things and report tomorrow. Appreciate all the help and advice so far.

When you say is there power to the plug, are you referring to the mirror control switch or the actual plug to which the mirror connect in the door trim. If it is the latter, how do I best test for power when I am not sure which wire is which?? Thank you again for your advice so far btw

Thanks for the replies so far guys. I will tr to provide more detail and answer the questions above which may help. The mirror I bought is this: http://www.ebay.com.au/itm/190631247975?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT I must say item was delivered rather quickly (received within 5 days), well packaged and details of installation seemed adequate. The male plug from the aftermarket mirror fits perfectly into the female harness on my Aurion Presara. I thought this would be simple and I'd just need to hook up the motor wires for the auto folding functions. I plugged it in, and nothing, no LED indicator, no mirror motor movement. On closer inspection it all looked wrong, there were pins with wires in the plug which had no corresponding connection on the other plug, so I then knew I gotta do this the hard way. I used a test light and voltmeter to find the LED wires, which was simple because there are two WHITE/BLACK wires which are earth wires. With this found, I thought I was making good progress. I tried to test the wires for the mirror motor, but got nothing. I then noticed the mirror on the passenger side was not working (still stock and untouched). I checked all the fuses I should check (which was a pain in the *****) but couldn't find any faulty fuses. I decided to connect the module and motor wires so that I could at least get the auto fold function working, which I did. 07Prodigy, The Presara has auto tilt function on reverse as you may know, but no auto fold function, as it has no motor in the mirror case. Infact, I was hoping that I wouldn't lose the auto tilt function, since this comes from the ECU, and so really it shouldn't change (right??). I will be rechecking all the relevant Fuses again, but can someone tell me which ones other than ECU and ACC fuses I should be checking. I have been through the wiring diagrams and pretty much checked every single fuse there is to check. I cannot notice any faulty electric operations in the car elsewhere. I am at my wits end now, and cannot imagine what else could be wrong, unless I missed something I shouldn't.

Hello everyone. I was hoping someone could help me with what is now becoming a very frustrating problem. I have a 2008 Toyota Aurion Presara. I recently purchased auto folding mirrors, and have been trying to install them. The plug looked plug and play to the existing wiring harness so I plugged it in and tested it, only to find nothing worked. I then managed to find the LED wires and got them to wok, but to no avail on the motor. I am afraid I shorted something because now both mirrors wont respond or move as before (even with stock mirrors and everything plugged in as normal. I have thoroughly checked all the fuses (under passenger footwell and engine bay) and no fuses are blown. I have looked at all possible problems with wiring but cannot seem to located the problem. Where should I be looking??

Forgot to add, delivery was very quick (2-3 days).

Hi tom, I bought th Eonon head unit a few months back. Install was easy, nice monitor size compared to the stock navigation unit I had in my 08 Presara. I am happy with the unit, however I did notice that it occasionally resets or freezes (they provide you with a stylus which helps you press the reset button, so I'm guessing they knew its an issue :/). I hooked up the factory reverse camera to the unit using the helpful guides here and the display is awesome. I am running iprimo navigation and have no issues with it. If you have any queries I am happy to help.