Sometimes, you have no choice but to adjust the headlights - mine were too high Once I worked out what each of the 4 adjustment screws did, I got a reasonable result. Hopefully you can see 2 photos of the LHS headlight which shows the locations on my 2008 AT-X Aurion... links below.
http://i1004.photobucket.com/albums/af168/sp0t13/Headlight1b.png
http://i1004.photobucket.com/albums/af168/sp0t13/Headlight2c.jpg
Unless I'm mistaken (and I could be as I only needed to adjust the low beam vertical), the screw directions for adjusting are as below (according to the size 2 screwdriver turn, not the hex head on the screw which will twist in opposite directions).
For the LHS;
Low beam vertical, down is clockwise
Low beam horizontal, right (inwards or towards the middle) is clockwise
High beam vertical, up is clockwise
High beam horizontal, right is clockwise
For the RHS;
Low beam vertical, down is clockwise
Low beam horizontal, left (inwards) is clockwise
High beam vertical, up is clockwise
High beam horizontal, left is clockwise